DatasheetsPDF.com

TMP86CM25FG Data Sheet

CMOS 8-Bit Microcontroller

Download TMP86CM25FG Datasheet

TMP86CM25FG
TOSHIBA Original CMOS 8-Bit Microcontroller TLCS-870/C Series TMP86CM25FG TMP86CS25FG Semiconductor Company Date 2008/3/6 2008/8/29 Revision History Revision 1 First Release 2 Contents Revised Caution in Setting the UART Noise Rejection Time When UART is used, settings of RXDNC are limited depending on the transfer clock specified by BRG. The combination "O" is available but please do not select the combination "–". The transfer clock generated by timer/counter interrupt is calculated by the following equation : Transfer clock [Hz] = Timer/counter source clock [Hz] ÷ TTREG set value BRG setting Transfer clock [Hz] 000 fc/13 110 (When the transfer clock generated by timer/counter interrupt is the same as the right side column) fc/8 fc/16 fc/32 The setting except the above 00 (No noise rejection) O O O RXDNC setting 01 (Reject pulses shorter than 31/fc[s] as noise) 10 (Reject pulses shorter than 63/fc[s] as noise) O O – – O – 11 (Reject pulses shorter than 127/.
TMP86CM25FG

Download TMP86CM25FG Datasheet
TOSHIBA Original CMOS 8-Bit Microcontroller TLCS-870/C Series TMP86CM25FG TMP86CS25FG Semiconductor Company Date 2008/3/6 2008/8/29 Revision History Revision 1 First Release 2 Contents Revised Caution in Setting the UART Noise Rejection Time When UART is used, settings of RXDNC are limited depending on the transfer clock specified by BRG. The combination "O" is available but please do not select the combination "–". The transfer clock generated by timer/counter interrupt is calculated by the following equation : Transfer clock [Hz] = Timer/counter source clock [Hz] ÷ TTREG set value BRG setting Transfer clock [Hz] 000 fc/13 110 (When the transfer clock generated by timer/counter interrupt is the same as the right side column) fc/8 fc/16 fc/32 The setting except the above 00 (No noise rejection) O O O RXDNC setting 01 (Reject pulses shorter than 31/fc[s] as noise) 10 (Reject pulses shorter than 63/fc[s] as noise) O O – – O – 11 (Reject pulses shorter than 127/fc[s] as noise) – – – O O O – O O O O 2008-08-29 TMP86CM25/CS25 Document Change Notification ç ç The purpose of this notification is to inform customers about the launch of the Pb-free version of the device. The introduction of a Pb-free replacement affects the datasheet. Please understand that this notification is intended as a temporary substitute for a revision of the datasheet. Changes to the datasheet may include the following, though not all of them may apply to this particular d.


TMP86CM25AFG TMP86CM25FG TMP86CS25FG


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)