Transmissive Photosensors (Photo Interrupters)
CNA1015
Photo Interrupters
Overview
(2.5)
Unit : mm
14.0 5.0±0.15 A 0....
Transmissive Photosensors (Photo Interrupters)
CNA1015
Photo Interrupters
Overview
(2.5)
Unit : mm
14.0 5.0±0.15 A 0.5±0.1 Device center
5.0 (C1)
10.0 min. 2.5
CNA1015 series is a transmissive photosensor series in which a high efficiency GaAs infrared light emitting diode is used as the light emitting element, and a high sensitivity photo
transistor is used as the light detecting element. The two elements are arranged so as to face each other, and objects passing between them are detected.
10.0
A' (10.0)
(4-0.45)
Features
Position detection accuracy : 0.3 mm Gap width : 5 mm The type directly attached to PCB
2 3
1
4
Absolute Maximum Ratings (Ta = 25˚C)
Parameter Input (Light Forward current (DC) emitting diode) Power dissipation Collector current Reverse voltage (DC) Symbol Ratings VR IF PD*1 IC 5 50 75 20 30 5 100 Unit V mA mW mA V V mW ˚C ˚C
(Note) 1. Tolerance unless otherwise specified is ±0.3. 2. ( ) Dimension is reference.
Internal connector 2 3
Output (Photo Collector to emitter voltage VCEO
transistor) Emitter to collector voltage VECO Collector power dissipation Temperature
*1 *2
1 Pin connection
PC*2
Operating ambient temperature Storage temperature
Topr –25 to +85 Tstg –40 to +100
Input power derating ratio is 1.0 mW/˚C at Ta = 25˚C. Output power derating ratio is 1.33 mW/˚C at Ta = 25˚C.
Electrical Characteristics (Ta = 25˚C)
Parameter Input characteristics Reverse current (DC) Forward voltage (DC) Symbol VF IR ICEO VR = 3V VCE = 10V 0.5 5 10...