CS5203A−1, CS5203A−2, CS5203A−3, CS5203A−5 3.0 A Adjustable, and Fixed 1.5 V, 3.3 V and 5.0 V Linear Regulators
The CS52...
CS5203A−1, CS5203A−2, CS5203A−3, CS5203A−5 3.0 A Adjustable, and Fixed 1.5 V, 3.3 V and 5.0 V Linear
Regulators
The CS5203A series of linear
regulators provides 3.0 A at adjustable and fixed voltages with an accuracy of ±1.0% and ±2.0% respectively. The adjustable version uses two external resistors to set the output voltage within a 1.25 V to 13 V range. The
regulators are intended for use as post
regulators and microprocessor supplies. The fast loop response and low dropout voltage make these
regulators ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages as low as 1.0 V depending on the output current level. The maximum quiescent current is only 10 mA at full load. The
regulators are fully protected against overload conditions with protection circuitry for Safe Operating Area (SOA), overcurrent and thermal shutdown. The CS5203A is pin compatible with the LT1085 family of linear
regulators but has lower dropout voltage. The
regulators are available in TO−220−3 and surface mount D2PAK−3 packages.
Features http://onsemi.com
TO−220 THREE LEAD T SUFFIX CASE 221A 1 2
Adjustable Output Tab = VOUT Pin 1. Adj 2. VOUT 3. VIN Fixed Output Tab = VOUT Pin 1. GND 2. VOUT 3. VIN
3 D2PAK−3 DP SUFFIX CASE 418AB
12
3 D2PAK−3 (Short Lead) DPS SUFFIX CASE 418F
12
3
Pb−Free Package is Available Output Current to 3.0 A Output Trimmed to ±1.0% Dropout Voltage 1.05 V @ 3.0 A Fast...