CT1469-2 MIL-STD-1397 Type E 10MHz Transceiver
CT1469-2 MIL-STD-1397 Type E 10MHz Transceiver
Features
• • • • • • • • Low Level ±0.65V output Optional transformer iso...
Description
CT1469-2 MIL-STD-1397 Type E 10MHz Transceiver
Features
Low Level ±0.65V output Optional transformer isolation Internally set threshold Operates with ±5 volt supply Matched to 50 ohms system impedance power on or off Bipolar construction for radiation resistance Power management Interfaces directly to the CT1496-2 (Manchester Encoder) and CT1508-2 (Manchester Decoder) MIL-PRF-38534 compliant devices available
CIRCUIT TECHNOLOGY
www.aeroflex.com
A E RO
FL
EX L A
B
S
C
ISO 9001
E
I NC .
RTIFIED
General Description
CT1469-2 is a hybrid microcircuit which incorporates a MIL-STD 1397 Type E 10MHz transceiver in a single package. The transmitter section accepts 10MHZ serial Manchester encoded TTL NRZ data from the encoder and transformer couples a bipolar ±0.65 volt (nominal) signal level to a 50 ohm triaxial cable for transmission up to 1000 ft. The CT1469-2 receiver accepts a bipolar signal level and outputs an NRZ TTL serial data or SIS / SOS signal to the decoder (CT1508-2). Aeroflex Circuit Technology is a 80,000 square foot MIL-PRF-38534 certified facility in Plainview, N.Y.
Power Conditioner
Drive 2
Linear Amp TX Data Input
Xfmr Sec / RX Data Input Xfmr Sec Xfmr Primary / TX Data Output Xfmr Primary / TX Data Output
TX Inhibit
TX Data Input +5V Drive 1
Xfmr Sec Linear Amp Xfmr Sec / RX Data Input Level Detector RX Data
www.DataSheet4U.com
-5V Receiver Strobe Digital and Analog Gnd
Level Detector RX Data
Figure 1 – Block Diagram eroflex Cir...
Similar Datasheet