DatasheetsPDF.com

CT30VS-8 Dataheets PDF



Part Number CT30VS-8
Manufacturers Mitsubishi Electric Semiconductor
Logo Mitsubishi Electric Semiconductor
Description STROBE FLASHER USE
Datasheet CT30VS-8 DatasheetCT30VS-8 Datasheet (PDF)

MITSUBISHI INSULATED GATE BIPOLAR TRANSISTOR CT30VS-8 STROBE FLASHER USE CT30VS-8 OUTLINE DRAWING 1.5MAX. r 10.5MAX. Dimensions in mm 4.5 1.3 1.5MAX. 8.6 ± 0.3 9.8 ± 0.5 3.0 +0.3 –0.5 0 +0.3 –0 1 5 0.8 0.5 q w e wr 2.6 ± 0.4 q q GATE w COLLECTOR e EMITTER r COLLECTOR e ¡VCES .... 400V ¡ICM ... 180A TO-220S APPLICATION Strobe Fl.

  CT30VS-8   CT30VS-8


Document
MITSUBISHI INSULATED GATE BIPOLAR TRANSISTOR CT30VS-8 STROBE FLASHER USE CT30VS-8 OUTLINE DRAWING 1.5MAX. r 10.5MAX. Dimensions in mm 4.5 1.3 1.5MAX. 8.6 ± 0.3 9.8 ± 0.5 3.0 +0.3 –0.5 0 +0.3 –0 1 5 0.8 0.5 q w e wr 2.6 ± 0.4 q q GATE w COLLECTOR e EMITTER r COLLECTOR e ¡VCES ............................................................................... 400V ¡ICM ................................................................................... 180A TO-220S APPLICATION Strobe Flasher. MAXIMUM RATINGS Symbol VCES VGES VGEM ICM Tj Tstg (Tc = 25°C) Parameter Collector-emitter voltage Gate-emitter voltage Peak gate-emitter voltage Collector current (Pulsed) Junction temperature Storage temperature Conditions VGE = 0V VCE = 0V, See notice 4 VCE = 0V, tw = 0.5s See figure 1 Ratings 400 ±30 ±40 180 –40 ~ +150 –40 ~ +150 4.5 Unit V V V A °C °C ELECTRICAL CHARACTERISTICS Symbol V(BR)CES ICES IGES VGE(th) Parameter (Tj = 25°C) Test conditions IC = 1mA, VGE = 0V VCE = 400V, VGE = 0V VGE = ±40V, VCE = 0V VCE = 10V, IC = 1mA Limits Min. 450 — — — Typ. — — — — Max. — 10 ±0.1 7.0 Unit V µA µA V Feb.1999 Collector-emitter breakdown voltage Collector-emitter leakage current Gate-emitter leakage current Gate-emitter threshold voltage (1.5) MITSUBISHI INSULATED GATE BIPOLAR TRANSISTOR CT30VS-8 STROBE FLASHER USE PERFORMANCE CURVES MAXIMUM PULSE COLLECTOR CURRENT 200 CM = 1000µF 160 MAIN CAPACITOR CM (µF) TC < = 50°C TC < = 70°C MAXIMUM PULSE COLLECTOR CURRENT 2000 PULSE COLLECTOR CURRENT ICM (A) 1600 120 1200 80 800 40 400 VCM = 350V < 70°C TC = VGE > = 28V 140 160 180 200 220 0 0 10 20 30 40 50 0 120 GATE-EMITTER VOLTAGE VGE (V) PULSE COLLECTOR CURRENT ICP (A) Figure 1 Figure 2 APPLICATION EXAMPLE IXe TRIGGER Vtrig SIGNAL CM Vtrig + – VCM IGBT GATE VG VOLTAGE RG VCE VG IGBT Xe TUBE CURRENT Ixe RECOMMEND CONDITION VCM = 330V IP = 160A CM = 800µF VGE = 28V MAXIMUM CONDITION 360V 180A 1000µF Notice 1. Gate drive voltage during on-period must be applied to satisfy the rating of maximum pulse collector current. And reverse gate current during turn-off must be kept less than 1A. (In general, it is satisfied if RG ≥ 30Ω) Notice 2. IGBT has MOS structure and its gate is insulated by thin silicon oxide. So please handle carefully not to suffer from electrostatic charge. Notice 3. The operation life should be endured 5,000 shots under the charge current (Ixe ≤ 180A : full luminescence condition) of main condenser (CM=1000µF). Repetition period under full luminescence condition is over 3 seconds. Notice 4. Total operation hours must be applied within 5,000 hours. Feb.1999 .


CT30VM-8 CT30VS-8 CT30VS-8


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)