6-BIT MAGNETIC ANGULAR POSITION ENCODER
6-BIT MAGNETIC ANGULAR POSITION ENCODER WITH SERIAL INTERFACE
Key Features
u Up to 64 positions within 360° u Non contac...
Description
6-BIT MAGNETIC ANGULAR POSITION ENCODER WITH SERIAL INTERFACE
Key Features
u Up to 64 positions within 360° u Non contact switching u Simple magnet as rotary encoder u Zero position programmable (independent of
magnet orientation)
u Synchronous Serial Interface (SSI) u Cascading is possible u Chip Select Input u Small 8-Pin SOIC (SMT) Package u Temperature Range: -40°C ...+85°C
Ordering Information Part Number Package AS5020 SOIC 8 AS5020T SOIC8 Tape and Reel
General Description The device provides the absolute angular position of a simple magnet that is placed under or above the device’s surface. The device includes the Hall Sensor Array, signal conditioning and post processing needed to generate a 6-bit binary code. The binary code can be easily accessed by a Synchronous Serial Interface (SSI). The angle between the device and the magnetic polarisation axis is exactly represented by one of 64 sectors (of 5.625° each) in the full 360° range. Zero-Position Programming allows one time programming of a specific zero position between the device and the magnet. The initial zero position is shown below.
60
0... initial
4
56
52
α
N S
8
12
48
44
16
20
40
36
24
Functional Block Diagram
32 4mm
28
Rev. n/c
Page 1/11
Feb 2001
6-Bit Magnetic Position Encoder –Data Sheet Rev.1.0
AS5020
Pin Description Pin # 1 Symbol DATA Type DO Description DATA Output of the SSI. If PD/CS=0, the measured angle data (6bit value) is serially shifted out over this pin by the CLK, starting...
Similar Datasheet