Voltage Variable Absorptive Attenuator 40 dB/ 0.5-3.0 GHz
AT-108
Voltage Variable Absorptive Attenuator 40 dB, 0.5— 0.5 — 3.0 GHz
Features
• • • • • • Single Positive Voltage Co...
Description
AT-108
Voltage Variable Absorptive Attenuator 40 dB, 0.5— 0.5 — 3.0 GHz
Features
Single Positive Voltage Control 0 to +5 Volts 40 dB Attenuation Range at 900 MHZ GHz ± 2 dB Linearity from BSL Low DC Power Consumption Low-Cost SOIC-8 Plastic Package Tape and Reel Packaging Available
SOIC-81
PIN 8
Oreintation Mark
.1497/.1574 (3.80/4.00) -B-
.2284/.2440 (5.80/6.20) M BM .010(.25)
PIN 1 .1890/.1968 (4.80/5.00) -A-
Description
M/A-COM’s AT-108 is a GaAs, MESFET MMIC voltage variable absorptive attenuator in a low cost SOIC-8 lead surface mount plastic package. The AT-108 is ideally suited for use where linear attenuation fine tuning and very low power consumption are required. Typical applications include radio, cellular, GPS equipment and automatic gain/level control circuits. The AT-108 is fabricated with a monolithic GaAs MMIC using a mature 1-micron process. The process features full chip passivation for increased performance and reliability.
.0532/.0688 (1.35/1.75) .004 (0.10) BSC. .050 (1.27)
.0040/.0098 (.10/.25) -C-
CHAMFER (OPTIONAL ) 0°/80°
.013/.020 (8 (.33/.51) PL) M C AM B S .010(.25)
.016/.050 (0.40/1.27)
.0075/.0098 (.19/.25)
1. Dimensions are in inches/mm.
Ordering Information
Part Number AT-108 AT-108TR AT-108RTR Package SOIC-8 Lead Plastic Package Forward Tape and Reel1 Reverse Tape and Reel1
1. If specific reel size is required, consult factory for part number assignment.
Electrical Specifications: TA = 25°C1=
Parameter Insertion Lo...
Similar Datasheet