Digital Attenuator/ 1 Bit/ 10 dB Step DC - 2.0 GHz
Digital Attenuator, 1 Bit, 10 dB Step, DC - 2.0 GHz
AT-266
AT-266
Digital Attenuator, 1 Bit, 10 dB Step DC - 2.0 GHz
...
Description
Digital Attenuator, 1 Bit, 10 dB Step, DC - 2.0 GHz
AT-266
AT-266
Digital Attenuator, 1 Bit, 10 dB Step DC - 2.0 GHz
Features
Single 10 dB Step Low Loss 0.3dB Typ. @ 900 MHz Low Cost Plastic SOT25 Package
SOT-25 Plastic Package
.114 ± .008 2,9 ± 0,2 .075 ± .008 1,90 ± 0,2 + .008 .043 - .004 1,10 + 0,2 - 0,1 .110 ± .008 2,80 ± 0,2
Description
M/A-COM’s AT-266 is a 1 bit, 10 dB step GaAs MMIC Digital Attenuator in a low cost SOT-25 surface mount plastic package. The AT-266 is ideally suited for use where high accuracy, very low power consumption and low intermodulation products are required. Typical applications include radio, wireless LANs, GPS equipment and other gain/level control circuits. The AT-266 is a GaAs MMIC using a mature 1 micron process. The process features full chip passivation for increased performance and reliability.
.063 ± .004 1,6 ± 0,1
.008 MIN 0,20 MIN
Pin 1 + .004 .006 - .002 0,15 + 0,1 - 0,05
+ .004 .031 - .007 0,80 + 0,1 - 0,18
.002 ± .002 0,05 ± 0,05 + .004 .016 - .002 0,40 + 0,1 - 0,05
Pin Configuration
PIN No. 1 2 3 4 5
1.
Truth Table
Description RF In/Out RF Ground RF In/Out Control Voltage Control Voltage
Negative
3
Function RF1 RF2 V1 V2
1 1
MODE (Control) Postive
1
V1 0 ± 0.2V +3 to +8V -VC ± 0.2 V + VC 0 ± 0.2V -3V to -8V
V2 +3 to +8V 0 ± 0.2V +VC -VC ± 0.2V -3V to -8V 0 ± 0.2V
Atten. 10 dB IL 10 dB IL IL 10 dB
1
GND
1
Postive / Negative1,2
Series Capacitors on PINs1, 3 and 5, Shunt Capacitor on PIN 2 are required for ...
Similar Datasheet