CMOS Low Voltage RF/Video / SPDT Switch
a
FEATURES High Off Isolation –80 dB at 30 MHz –3 dB Signal Bandwidth 250 MHz +1.8 V to +5.5 V Single Supply Low On-Resi...
Description
a
FEATURES High Off Isolation –80 dB at 30 MHz –3 dB Signal Bandwidth 250 MHz +1.8 V to +5.5 V Single Supply Low On-Resistance (15 ⍀ Typically) Low On-Resistance Flatness Fast Switching Times
tON Typically 8 ns tOFF Typically 3 ns Typical Power Consumption < 0.01 W TTL/CMOS Compatible
APPLICATIONS Audio and Video Switching RF Switching Networking Applications Battery Powered Systems Communication Systems Relay Replacement Sample-and-Hold Systems
CMOS, Low Voltage RF/Video, SPDT Switch
ADG752
FUNCTIONAL BLOCK DIAGRAM
ADG752
S1 D
S2
IN
SWITCH SHOWN FOR A LOGIC "1" INPUT
GENERAL DESCRIPTION The ADG752 is a low voltage SPDT (single pole, double throw) switch. It is constructed using switches in a T-switch configuration, which results in excellent Off Isolation while maintaining good frequency response in the ON condition.
High off isolation and wide signal bandwidth make this part suitable for switching RF and video signals. Low power consumption and operating supply range of +1...
Similar Datasheet