HSP48901

HSP48901 Data Sheet May 1999 File Number 2459.5 3 x 3 Image Filter The Intersil HSP48901 is a high speed 9-Tap FIR Filter which utilizes 8-bit wide data and coefficients. It can be configured as a one dimensional (1-D) 9-Tap filter for a variety of signal processing applications, or as a two dimensional (2-D) filter for image processing. In the 2-D configuration, the device is ideally suited for implementing 3 x 3 kernel convolution. The 30MHz clock rate allows a large number of image sizes to be processed within the required frame time for real-time video. Data is provided to the HSP48901 through the use of programmable data buffers such as the HSP9500 or any other Programmable Shift Register. Coefficient and pixel input data are 8-bit signed or unsigned integers, and the 20-bit extended output guarantees no overflow will occur during the filtering operation. There are two internal register banks for storing independent 3 x 3 filter kernels, thus, facilitating the implementation of adaptive filters and multiple filter operations on the same data. The configuration of the HSP48901 Image Filter is controlled through a standard microprocessor interface and all inputs and outputs are TTL compatible. Features DC to 30MHz Clock Rate Configurable for 1-D and 2-D Correlation/Convolution Dual Coefficient Mask Registers, Switchable in a Single Clock Cycle Two’s Complement or Unsigned 8-Bit Input Data and Coefficients 20-Bit Extended Precision Output Standard µP Interface Applications ...