Push-Pull Outputs. HV583 Datasheet

HV583 Outputs. Datasheet pdf. Equivalent

Part HV583
Description 128 Channel Serial to Parallel Converter with Push-Pull Outputs
Feature HV583 HV583 Demo Kit Available 128 Channel Serial to Parallel Converter with Push-Pull Outputs Gen.
Manufacture Supertex Inc
Datasheet
Download HV583 Datasheet




HV583
HV583
HV583
Demo Kit
Available
128 Channel Serial to Parallel Converter
with Push-Pull Outputs
Features
Processed with HVCMOS technology
128 Channels
4 Separate shift registers
5V CMOS logic
Output voltages up to 80V
±30mA output current capability
Low power level shifting
40MHz data shifting
Latched data outputs
Forward and reverse shifting option via DIR pin
Output diode to ground and VPP for efficient power recovery
Outputs can be hot switched
Applications
Plasma Displays
Inkjet Printers
General Description
The Supertex HV583 is a 128 channel low voltage serial to high
voltage parallel converter with push-pull outputs. This device
has been designed for use as a display driver. It can also be used
in any application requiring multiple output, high voltage current
sourcing and sinking capability such as plasma displays and
inkjet printers. The device has 4 parallel 32-bit shift registers,
permitting data rates 4X the speed of one. The data are shifted
in during the low to high clock transition. There are also 128
latches and control logic to shift clockwise or counterclockwise.
The outputs can be in a high impedance state via the output
enable logic pin.
Functional Block Diagram
4
DIN
CLK
4 Shift
Registers
4
tDOUT
DIR
RST
LE
OLB
OHB
OE
128-bit
Latch
Output
Control
Level
Translators
and
HVOUT
Buffers
HVOUT1
HVOUT128
04/23/02
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.
1



HV583
Absolute Maximum Ratings*
VPP, High voltage supply
VDD, Logic supply voltage
Iout, Output source and sink current
-0.5V to +90V
-0.5V to +7.0V
-65mA to +40mA
Idiode, Output body diode current
-65mA to +65mA
Logic input voltages
Tj, Junction temperature
-0.5V to VDD+0.5V
-25°C to +150°C
Storage temperature
-40°C to +150°C
*All voltages are referenced to device ground. Absolute maximum ratings are those values
which damage to the device may occur. Functional operation under these conditions is not
implied. Continous operation of the device at the absolute rating level may affect device
reliability.
HV583
Ordering Information
Device
HV583
Recommended
Operating VPP Max
80V
Package Options
Die
HV583X
Notes:
Power-up sequence should be the following:
1. Connect ground.
2. Apply VDD.
3. Set all inputs (Data, CLK, Enable, etc.) to a known state.
4. Apply VPP.
Power-down sequence should be the reverse of the above.
Operating Conditions
Symbol
VPP
VDD
Iout
SR
fclk
Parameter
High voltage supply
Low voltage supply
HVout peak output current
VPP power supply slew rate
Clock frequency
Tj Operating junction temperature
Min Typ Max Units
Conditions
15 80 V Cload = 300pF
4.5 5.0
5.5
V
-30 30 mA
8.0 V/µs
40 MHz Data read
25 MHz Cascade connection
-25 +125 °C
Electrical Characteristics
DC Characteristics (Tj = 25°C, VDD = 5V, VPP = 80V)
Symbol
Parameter
Min Typ
IPPQ
IDDQ
HVoh
VPP quiescent supply current
VDD quiescent supply current
High level output voltage
73 76
10
HVohd Output p-channel body diode
HVol
Low level output voltage
3
HVold
Output n-channel body diode
-1.5
Vih Logic input high voltage
2.0
Vil Logic input low voltage
0
Iih Logic input high current
10 30
Iil Logic input low current
-1.0
Voh Logic output high
4.5V
Vil Logic output low
Max
10
10
81.5
6
VDD
0.8
1.0
50
0.5V
Units
µA
µA
V
V
V
V
V
V
µA
µA
µA
V
V
Conditions
Iout = 30mA, VPP = 80V
Iout = 10mA, VPP = 20V
Iout = -30mA, VPP =80V
Iout = -30mA
Iout = +30mA
VDD = 4.5V to 5.5V
VDD = 4.5V to 5.5V
Vih = 5.3V, VDD = 5.0V
Vih = 5.0V, For DIR only
Vil = -0.3V
Iout = 1.0mA
Iout = -1.0mA
2







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)