Analog Switch. HS-201HSRH Datasheet

HS-201HSRH Switch. Datasheet pdf. Equivalent

Part HS-201HSRH
Description BiCMOS Analog Switch
Feature DATASHEET Radiation Hardened High Speed, Quad SPST, BiCMOS Analog Switch HS-201HSRH, HS-201HSEH Th.
Manufacture Intersil Corporation
Datasheet
Download HS-201HSRH Datasheet




HS-201HSRH
DATASHEET
HS-201HSRH, HS-201HSEH
Radiation Hardened High Speed, Quad SPST, BiCMOS Analog Switch
FN4874
Rev 4.00
February 21, 2017
The HS-201HSRH and HS-201HSEH are monolithic BiCMOS
analog switches featuring power-off high input impedance,
very fast switching speeds and low ON-resistance. Fabrication
on our DI RSG process ensures SEL immunity and only very
slight low dose rate sensitivity (ELDRS). These Class V/Q
devices are tested and guaranteed for 300krad(Si) total dose
performance.
Power-off high input impedance enables the use of this device
in redundant circuits without causing data bus signal
degradation. ESD protection, overvoltage protection, fast
switching times, low ON-resistance, and guaranteed radiation
hardness make the HS-201HSRH ideal for any space
application that requires improved switching performance.
Related Literature
• For a full list of related documents, visit our website
- HS-201HSRH product page
- HS-201HSEH product page
Features
• Electrically screened to DLA SMD# 5962-99618
• QML qualified per MIL-PRF-38535
• Radiation performance
- High dose rate (50-300rad(Si)/s). . . . . . . . . . . 300krad(Si)
- Low dose rate (0.01rad(SI)/s) . . . . . . . . . . . . . . 50krad(Si)
- SEL immune . . . . . . . . . . . . . . . . . . . . . . . . . DI RSG process
• Overvoltage protection (power on, switch off) . . . . . . . . ±30V
• Power off high impedance . . . . . . . . . . . . . . . . . . . . . . . . ±17V
• Fast switching times
- tON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110ns (max)
- tOFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80ns (max)
• Low “ON” resistance . . . . . . . . . . . . . . . . . . . . . . . . 50Ωmax
• Pin compatible with industry standard 201 types
• Operating supply range . . . . . . . . . . . . . . . . . . . . ±10V to ±15V
• Wide analog voltage range (±15V supplies) . . . . . . . . . ±15V
• TTL compatible
Applications
• High speed multiplexing
• Sample and hold circuits
• Digital filters
• Operational amplifier gain switching networks
• Integrator reset circuits
Pin Configuration
HS1-201HSRH, HS1-201HSEH SBDIP (CDIP2-T16)
HS9-201HSRH, HS9-201HSEH FLATPACK (CDFP4-F16)
TOP VIEW
IN1 1
D1 2
S1 3
V- 4
GND 5
S4 6
D4 7
IN4 8
16 IN2
15 D2
14 S2
13 V+
12 NC
11 S3
10 D3
9 IN3
FN4874 Rev 4.00
February 21, 2017
Page 1 of 7



HS-201HSRH
HS-201HSRH, HS-201HSEH
Ordering Information
ORDERING
SMD NUMBER
(Note 2)
INTERNAL
MKT. NUMBER
(Note 1)
TEMP. RANGE
(°C)
PACKAGE
(RoHS COMPLIANT)
PKG.
DWG. #
5962F9961801VEC
HS1-201HSRH-Q
-55 to +125
16 Ld SBDIP
D16.3
5962F9961802VEC
HS1-201HSEH-Q
-55 to +125
16 Ld SBDIP
D16.3
5962F9961801QEC
HS1-201HSRH-8
-55 to +125
16 Ld SBDIP
D16.3
5962F9961801VXC
HS9-201HSRH-Q
-55 to +125
16 Ld Flatpack
K16.A
5962F9961802VXC
HS9-201HSEH-Q
-55 to +125
16 Ld Flatpack
K16.A
5962F9961801QXC
HS9-201HSRH-8
-55 to +125
16 Ld Flatpack
K16.A
5962F9961801V9A
HS0-201HSRH-Q
-55 to +125
Die
5962F9961802V9A
HS0-201HSEH-Q
-55 to +125
Die
N/A
HS1-201HSRH/PROTO (Note 3)
-55 to +125
16 Ld SBDIP
D16.3
N/A
HS9-201HSRH/PROTO (Note 3)
-55 to +125
16 Ld Flatpack
K16.A
N/A
HS0-201HSRH/SAMPLE (Note 3)
-55 to +125
Die
NOTES:
1. These Intersil Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with both
SnPb and Pb-free soldering operations.
2. Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The listed SMD numbers must be
used when ordering.
3. The /PROTO and /SAMPLE are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect (SEE) immunity. These parts are intended for
engineering evaluation purposes only. The /PROTO parts meet the electrical limits and conditions over-temperature specified in the DLA SMD and
are in the same form and fit as the qualified device. The /SAMPLE die is capable of meeting the electrical limits and conditions specified in the DLA
SMD at +25°C only. The /SAMPLE is a die and does not receive 100% screening over-temperature to the DLA SMD electrical limits. These part types
do not come with a Certificate of Conformance because there is no Radiation Assurance testing and they are not DLA qualified devices.
FN4874 Rev 4.00
February 21, 2017
Page 2 of 7







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)