Op Amps. HS-3530ARH Datasheet

HS-3530ARH Amps. Datasheet pdf. Equivalent

Part HS-3530ARH
Description Radiation Hardened Programmable Low Power Op Amps
Feature DATASHEET Radiation Hardened Programmable Low Power Op Amps HS-3530ARH, HS-3530AEH The HS-3530ARH,.
Manufacture Intersil Corporation
Datasheet
Download HS-3530ARH Datasheet



HS-3530ARH
DATASHEET
HS-3530ARH, HS-3530AEH
Radiation Hardened Programmable Low Power Op Amps
FN4653
Rev 4.00
Jun 18, 2018
The HS-3530ARH and HS-3530AEH are low power operational
amplifiers, which are internally compensated monolithic
devices offering a wide range of performance specifications.
Parameters such as power dissipation, slew rate, bandwidth,
noise, and input DC parameters are programmed by selecting
an external resistor or current source. Supply voltages as low
as ±3V may be used with little degradation of AC performance.
Operation from -55°C to +125°C is ensured.
A major advantage of the HS-3530ARH, HS-3530AEH is that
operating characteristics remain virtually constant over a wide
supply range (±3V to ±15V), allowing the amplifiers to offer
maximum performance in almost any system, including
battery operated equipment. A primary application for these
devices is in active filtering and conditioning for a wide variety
of signals that differ in frequency and amplitude. By
modulating the set current, they can be used for designs such
as current controlled oscillators/modulators, sample and hold
circuits, and variable active filters.
Related Literature
For a full list of related documents, visit our website
HS-3530ARH, HS-3530AEH product pages
Features
• Radiation performance
- Single event latch-up . . . . . . . . . Immune (RSG DI Process)
- High dose rate (50-300rad(Si)/s). . . . . . . . . . . 300krad(Si)
- Low dose rate (0.01rad(SI)/s) . . . . . . . . . . . . . . 50krad(Si)
• Wide range AC programming
- Slew rate . . . . . . . . . . . . . . . . . . . . . . . . . . 0.025 to 0.1V/µs
- Gain X bandwidth. . . . . . . . . . . . . . . . . . . 30kHz to 750kHz
• Wide range DC programming
- Power supply range . . . . . . . . . . . . . . . . . . . . ±3.0V to ±15V
• Supply current . . . . . . . . . . . . . . . . . . . . . . . . . 15µA to 150µA
• Output current . . . . . . . . . . . . . . . . . . . . . . . 0.25mA to 2.5mA
• Quiescent power. . . . . . . . . . . . . . . . . . . . . . . . . . 4.8mW (max)
• Dielectrically isolated device islands
• Short-circuit protection
• Full -55°C to +125°C military temperature range
• Electrically screened to SMD 5962-95687
FN4653 Rev 4.00
Jun 18, 2018
Page 1 of 7



HS-3530ARH
HS-3530ARH, HS-3530AEH
Ordering Information
ORDERING
NUMBER (Notes 1, 2)
PART
NUMBER
Radiation Hardness
HDR LDR
TEMP.
RANGE (°C)
PACKAGE (RoHS
COMPLIANT
PKG. DWG. #
5962F9568701QGA
HS2-3530ARH-8
100krad(Si)
-
-55 to +125
8 LD METAL CAN
T8.C
5962F9568701VGA
HS2-3530ARH-Q
100krad(Si)
-
-55 to +125
8 LD METAL CAN
T8.C
5962F9568702VGA
HS2-3530AEH-Q
100krad(Si) 50krad(Si)
-55 to +125
8 LD METAL CAN
T8.C
5962F9568701VXC
HS9-3530ARH-Q
100krad(Si)
-
-55 to +125
10 LD FLATPACK,
SOLDER SL
K10.A
5962F9568702VXC
HS9-3530AEH-Q
100krad(Si) 50krad(Si)
-55 to +125
10 LD FLATPACK,
SOLDER SL
K10.A
5962F9568701V9A
HS0-3530ARH-Q
100krad(Si)
-
-55 to +125
DIE
-
5962F9568702V9A
HS0-3530AEH-Q
100krad(Si) 50krad(Si)
-55 to +125
DIE
-
HS2-3530ARH/PROTO (Note 3) HS2-3530ARH/PROTO
-
-55 to +125
8 LD METAL CAN
T8.C
HS9-3530ARH/PROTO (Note 3) HS9-3530ARH/PROTO
-
-55 to +125
10 LD FLATPACK,
K10.A
SOLDER SL
HSO-3530ARH/SAMPLE (Note 3) HSO-3530ARH/SAMPLE
- -55 to +125
DIE
-
NOTES:
1. These Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb
and Pb-free soldering operations.
2. Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers listed must be
used when ordering.
3. The /PROTO and /SAMPLE are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect (SEE) immunity. These parts are intended for
engineering evaluation purposes only. The /PROTO parts meet the electrical limits and conditions across the temperature range specified in the DLA
SMD and are in the same form and fit as the qualified device. The /SAMPLE die is capable of meeting the electrical limits and conditions specified
in the DLA SMD at +25°C only. The /SAMPLE is a die and does not receive 100% screening across the temperature range to the DLA SMD electrical
limits. These part types do not come with a certificate of conformance because there is no radiation assurance testing and they are not DLA qualified
devices.
Pin Configurations
HS2-3530ARH, HS2-3530AEH (CAN), MACY1-X8
TOP VIEW
OFFSET
NULL
1
INVERTING
INPUT
2
ISET
8
7 V+
6 OUTPUT
NON-INVERTING 3
INPUT
5 OFFSET
4 NULL
V-
HS9-3530ARH, HS9-3530AEH(FLATPACK), CDFP3-F10
TOP VIEW
NC
OFFSET
- IN
+ IN
V-
1 10
29
38
47
56
ISET
V+
OUTPUT
OFFSET
NC
FN4653 Rev 4.00
Jun 18, 2018
Page 2 of 7







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)