Analog Switches. HS1-390RH883S Datasheet

HS1-390RH883S Switches. Datasheet pdf. Equivalent

Part HS1-390RH883S
Description Radiation Hardened CMOS Analog Switches
Feature .
Manufacture Intersil Corporation
Datasheet
Download HS1-390RH883S Datasheet




HS1-390RH883S
September 1995
HS-302RH/883S, HS-303RH/883S,
HS-306RH/883S, HS-307RH/883S,
HS-384RH/883S, HS-390RH/883S
Radiation Hardened
CMOS Analog Switches
Features
Description
• This Circuit is Processed in Accordance to Mil-Std-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• Radiation Hardened
- Functional Total Dose Exceeds 1 x 105 RAD Si
• Pin for Pin Compatible with Intersil HI-3XX Series
Analog Switches
• Analog Signal Range 15V
• Low Leakage
• Low RON
• No Latch Up
• Versions for 5V and 15V Digital Systems
• Low Operating Power
• Military Temperature Range -55oC to +125oC
Applications
• Sample and Hold i.e. Low Leakage Switching
• Op Amp Gain Switching i.e. Low ON Resistance
• Switched Capacitor Filters
• Low Level Switching Circuits
• Satellites
• Nuclear Reactor Controls
• Military Environments
The HS-3XXRH/883S family of analog switches are
monolithic devices fabricated using Radiation Hardened
CMOS technology and the Intersil dielectric isolation pro-
cess for latch-up free operation. Improved total dose hard-
ness is obtained by layout (thin oxide tabs extending to a
channel stop) and processing (hardened gate oxide). These
switches offer low-resistance switching performance for ana-
log voltages up to the supply rails. “ON” resistance is low
and stays reasonably constant over the full range of operat-
ing voltage and current. “ON” resistance also stays reason-
ably constant when exposed to radiation, being typically 30
pre-rad and 35post 100K RAD-Si. All devices provide
break-before-make switching.
The 6 devices in this switch series are differentiated by type
of switch action, pinout and digital logic levels. The HS-302/
303/384/390RH/883S switches have 5V digital inputs while
the HS-306/307RH/883S switches have 15V digital inputs.
All devices are available in Ceramic Flatpack and SBDIP
packages. The HS-3XXRH/883S switches can directly
replace the HI-3XX series devices.
Functional Diagram
IN N P
D
Ordering Information
PART NUMBER
HS1-302RH/883S
HS9-302RH/883S
HS1-302RH/Sample
HS9-302RH/Sample
HS1-303RH/883S
HS9-303RH/883S
HS1-303RH/Sample
HS9-303RH/Sample
HS1-306RH/883S ( Note 1)
HS9-306RH/883S ( Note 1)
TEMPERATURE RANGE
-55oC to +125oC
-55oC to +125oC
+25oC
+25oC
-55oC to +125oC
-55oC to +125oC
+25oC
+25oC
-55oC to +125oC
-55oC to +125oC
SCREENING LEVEL
PACKAGE
Intersil /883 Class S Equivalent 14 Lead SBDIP
Intersil /883 Class S Equivalent 14 Lead Ceramic Flatpack
Sample
14 Lead SBDIP
Sample
14 Lead Ceramic Flatpack
Intersil /883 Class S Equivalent 14 Lead SBDIP
Intersil /883 Class S Equivalent 14 Lead Ceramic Flatpack
Sample
14 Lead SBDIP
Sample
14 Lead Ceramic Flatpack
Intersil /883 Class S Equivalent 14 Lead SBDIP
Intersil /883 Class S Equivalent 14 Lead Ceramic Flatpack
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999 1
Spec Number 518526
File Number 3067.1



HS1-390RH883S
HS-3XXRH/883S
Ordering Information (Continued)
PART NUMBER
HS1-306RH/Sample (Note 1)
HS9-306RH/Sample (Note 1)
HS1-307RH/883S
HS9-307RH/883S
HS1-307RH/Sample
HS9-307RH/Sample
HS1-384RH/883S (Note 1)
HS9-384RH/883S (Note 1)
HS1-384RH/Sample (Note 1)
HS9-384RH/Sample (Note 1)
HS1-390RH/883S
HS9-390RH/883S
HS1-390RH/Sample
HS9-390RH/Sample
TEMPERATURE RANGE
+25oC
+25oC
-55oC to +125oC
-55oC to +125oC
+25oC
+25oC
-55oC to +125oC
-55oC to +125oC
+25oC
+25oC
-55oC to +125oC
-55oC to +125oC
+25oC
+25oC
NOTE:
1. Not recommended for new design.
SCREENING LEVEL
PACKAGE
Sample
14 Lead SBDIP
Sample
14 Lead Ceramic Flatpack
Intersil /883 Class S Equivalent 14 Lead SBDIP
Intersil /883 Class S Equivalent 14 Lead Ceramic Flatpack
Sample
14 Lead SBDIP
Sample
14 Lead Ceramic Flatpack
Intersil /883 Class S Equivalent 16 Lead SBDIP
Intersil /883 Class S Equivalent 16 Lead Ceramic Flatpack
Sample
16 Lead SBDIP
Sample
16 Lead Ceramic Flatpack
Intersil /883 Class S Equivalent 16 Lead SBDIP
Intersil /883 Class S Equivalent 16 Lead Ceramic Flatpack
Sample
16 Lead SBDIP
Sample
16 Lead Ceramic Flatpack
Pinouts (Switch States are for Logic “1” Inputs)
14 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T14
TOP VIEW
DUAL DPST
HS-302RH/883S
HS-306RH/883S
DUAL SPDT
HS-303RH/883S
HS-307RH/883S
NC 1
S3 2
D3 3
D1 4
S1 5
IN1 6
GND 7
14 V+
13 S4
12 D4
11 D2
10 S2
9 IN2
8 V-
NC 1
S3 2
D3 3
D1 4
S1 5
IN1 6
GND 7
14 V+
13 S4
12 D4
11 D2
10 S2
9 IN2
8 V-
LOGIC
0
1
SWITCH
1-4
OFF
ON
LOGIC
0
1
SW1
SW2
OFF
ON
SW3
SW4
ON
OFF
16 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T16
TOP VIEW
DUAL DPST
HS-384RH/883S
D1 1
NC 2
D3 3
S3 4
S4 5
D4 6
NC 7
D2 8
16 S1
15 IN1
14 V-
13 GND
12 NC
11 V+
10 IN2
9 S2
DUAL SPDT
HS-390RH/883S
D1 1
NC 2
D3 3
S3 4
S4 5
D4 6
NC 7
D2 8
16 S1
15 IN1
14 V-
13 GND
12 NC
11 V+
10 IN2
9 S2
LOGIC
0
1
SWITCH
1-4
OFF
ON
LOGIC
0
1
SW1
SW2
OFF
ON
SW3
SW4
ON
OFF
Spec Number 518526
2







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)