Operational Amplifier. HS2-3530RH-8 Datasheet

HS2-3530RH-8 Amplifier. Datasheet pdf. Equivalent

Part HS2-3530RH-8
Description Low Power/ Radiation Hardened Programmable Operational Amplifier
Feature HS-3530RH August 1995 Low Power, Radiation Hardened Programmable Operational Amplifier Pinout 8 LEAD.
Manufacture Intersil Corporation
Datasheet
Download HS2-3530RH-8 Datasheet




HS2-3530RH-8
HS-3530RH
August 1995
Low Power, Radiation Hardened
Programmable Operational Amplifier
Features
Pinout
• Radiation Environment
- Neutron Fluence (Φ) 5 x 1012 n/cm2 (E 10KeV)
- Gamma Rate (γ) 1 x 109 RAD (Si)/s
- Gamma Dose (γ) 1 x 106 RAD (Si)
• Wide Range AC Programming
- Slew Rate 0.06 to 3V/µs
- Gain X Bandwidth 100kHz to 5.0MHz
• Wide Range DC Programming
- Power Supply Range ±3.0V to ±15V
• Supply Current 10µA to 1.2mA
• Dielectrically Isolated Device Islands
8 LEAD METAL CAN PACKAGE (CAN)
MIL-STD-1835 MACY1-X8
TOP VIEW
OFFSET
NULL
1
INVERTING
INPUT
2
ISET
8
7 V+
6 OUTPUT
NON-INVERTING 3
5 OFFSET
INPUT
4
NULL
V-
• Short Circuit Protection
Description
NOTE:
1. Case tied to V-.
The HS-3530RH is a Low Power Operational Amplifier which
is an internally compensated monolithic device offering a
wide range of performance specifications. Parameters such
as power dissipation, slew rate, bandwidth, noise and input
DC parameters are programmed by selecting an external
resistor or current source. Supply voltages as low as ±3V
may be used with little degradation of AC performance. The
HS-3530RH has been specifically designed to meet
exposure to space radiation environments. Operation from -55oC
to +125oC is guaranteed.
A major advantage of the HS-3530RH is that operating
characteristics remain virtually constant over a wide supply
range (±3V to ±15V), allowing the amplifier to offer maximum
performance in almost any system, including battery
operated equipment. A primary application for this device is
in active filtering and conditioning for a wide variety of
signals that differ in frequency and amplitude. Also, by
modulating the set current, it can be used for designs such
as current controlled oscillators/modulators, sample and
hold circuits and variable active filters.
Functional Diagram
+V
OFFSET
NULL 2
7
2
-IN
+IN 3
5
6
8
1
4
ISET
OUT
-V OFFSET
NULL 1
Ordering Information
PART NUMBER
HS2-3530RH-8
HS2-3530RH-Q
HS2-3530RH/SAMPLE
TEMPERATURE
RANGE
PACKAGE
-55oC to +125oC 8 Lead Metal Can
-55oC to +125oC 8 Lead Metal Can
+25oC
8 Lead Metal Can
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
762
Spec Number 518079
File Number 3024.2



HS2-3530RH-8
Specifications HS-3530RH
Absolute Maximum Ratings
Reliability Information
Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . . . 40V
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V
Voltage at Either Input Terminal . . . . . . . . . . . . . . . . . . . . . . V+ to V-
ISET (Current at ISET) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500µA
VSET (Voltage to GND at ISET). . . . . . . . . (V+ -2.0V) < VSET < V+
Output Short Circuit Duration (Note 1) . . . . . . . . . . . . . . . . Indefinite
Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC
Storage Temperature Range . . . . . . . . . . . . . . . . . -65oC to +150oC
ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <2000V
Lead Temperature (Soldering 10s) . . . . . . . . . . . . . . . . . . . . . 275oC
Thermal Resistance
θJA θJC
Metal Can Package . . . . . . . . . . . . . . . . . 160oC/W 70oC/W
Maximum Package Power Dissipation at +125oC Ambient:
Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.31W
If device power exceeds package dissipation capability, provide heat
sinking or derate linearly at the following rate:
Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3mW/oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Operating Temperature Range . . . . . . . . . . . . . . . . -55oC to +125oC
Operating Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . ±3V to ±15V
VINcm 1/2 (V+ - V-)
RL 2kV
TABLE 1A. DC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Tested at: Supply Voltage = ±15V, RSOURCE = 100, RLOAD = 500k, VOUT = 0V, Unless Otherwise Specified.
PARAMETER
Input Offset
Voltage
SYMBOL
CONDITIONS
VIO VCM = 0V
Input Bias
Current
+IB VCM = 0V, +RS = 10k
-RS = 100
Note 2
GROUP A
SUBGROUP
1
2, 3
1
2, 3
TEMPERATURE
+25oC
+125oC, -55oC
+25oC
+125oC, 0oC
ISET = 1.5µA
MIN MAX
-3 3
-5 5
--
--
ISET = 15µA
MIN MAX
-3 3
-5 5
-40 40
-50 +50
UNITS
mV
mV
nA
nA
3
-55oC
- - -60 60 nA
-IB VCM = 0V, +RS = 100
1
+25oC
- - -40 40 nA
-RS = 10k
Note 2
2, 3
+125oC, 0oC
-
-
-50 +50
nA
Input Offset
Current
3
-55oC
- - -60 60 nA
IIO VCM = 0V, +RS = 10k
1
+25oC
- - -15 15 nA
-RS = 10k
Note 2
2, 3
+125oC, 0oC
-
-
-20 +20
nA
3
-55oC
- - -30 30 nA
Large Signal
Voltage Gain
+AVOL VOUT = 0V and +10V
Note 1
4
+25oC
65 - 80 - kV/V
5, 6 +125oC, -55oC 25 - 50 - kV/V
-AVOL VOUT = 0V and -10V
Note 1
4
+25oC
65 - 80 - kV/V
5, 6 +125oC, -55oC 25 - 50 - kV/V
Common Mode +CMRR VCM = +5V, +V = +10V
1
+25oC
80 - 80 -
dB
Rejection Ratio
-V = -20V, VOUT = -5V
2, 3
+125oC, -55oC 80 - 80 -
dB
-CMRR VCM = -5V, +V = +20V
-V = -10V, VOUT = +5V
1
+25oC
80 - 80 -
dB
2, 3
+125oC, -55oC 80 - 80 -
dB
Output Voltage
Swing
+VOUT Note 1
1
+25oC
12.5 - 12.5 -
V
2, 3 +125oC, -55oC 10.5 - 10.5 - V
-VOUT Note 1
1
+25oC
- -12.5 - -12.5
V
2, 3
+125oC, -55oC
- -10.5 - -10.5
V
Output Current
+IOUT RL = 2k
1
+25oC
0.25 - 2.5 -
mA
-IOUT RL = 2k
1
+25oC
- -0.25 -
-2.5 mA
Spec Number 518079
763







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)