Compliant Transceiver. HSDL1001 Datasheet

HSDL1001 Transceiver. Datasheet pdf. Equivalent


Part HSDL1001
Description Infrared IrDA Compliant Transceiver
Feature Infrared IrDA Compliant Transceiver Technical Data HSDL-1001 Features • Fully Compliant to IrDA 1.0.
Manufacture Agilent(Hewlett-Packard)
Datasheet
Download HSDL1001 Datasheet


Infrared IrDA Compliant Transceiver Technical Data HSDL-1001 HSDL1001 Datasheet
Recommendation Recommendation Datasheet HSDL1001 Datasheet




HSDL1001
Infrared IrDA
Compliant Transceiver
Technical Data
HSDL-1001
Features
• Fully Compliant to
IrDA 1.0 – 115 Kb/s
• Compatible with ASK,
Consumer IR/TV Remote
• Superb Nose-to-Nose
Operation
• Low Power Consumption
3 µA in Shutdown
• Supply Voltage Range
2.7 V – 5.5 V
• Operational Down to 2 V
• Free Netlist for IrDA
Modulation Circuitry
• Low Latency 100 µs
• Available in Tape & Reel
for Auto Insertion
• Drop in Replacement for
HSDL-1000
Description
The HSDL-1001 infrared
transceiver provides the interface
between logic and IR signals for
through-air, serial, half-duplex IR
data links and is designed to
satisfy the IrDA Physical Layer
Specification for data rates up to
115 Kb/s.
The HSDL-1001 contains a high
speed, high efficiency TS AlGaAs
875 nm LED, a silicon PIN
photodiode and a bipolar, silicon
integrated circuit. The IC contains
an LED driver, amplifiers and
a quantizer.
The shutdown function permits
operating the receiver in a
low current mode to minimize
battery drain.
Applications for the HSDL-1001
include notebook PCs, telephones,
pagers, printers, cameras, and
industrial handheld devices.
LEDC
V+
RLED
LEDA
BUTTRESS
LEAD*
PIN 1
1001
YYWW
PIN 1
INDICATOR
TXD
RXD
SHUTDOWN
V+
CX4 CX3
TXD
LED
VPIN
RXD
PHOTODIODE
COMPARATOR
SD
VCC
GND
GND
* SIDE BUTTRESS LEADS ARE FOR MECHANICAL STABILITY AND
SHOULD NOT BE CONNECTED TO ANY ELECTRICAL POTENTIAL.



HSDL1001
2
Package Dimensions
Option 0X1*
(00..04137)MAX.
3.4 ± 0.25
(0.14 ± 0.01)
13.21 ± 0.25
(0.52 ± 0.01)
6.4 ± 0.25
(0.25 ± 0.01)
3.4 ± 0.25
(0.14 ± 0.01)
(08..35346±±00..1051)MAX.
-B-
0.9 ± 0.25
(0.04 ± 0.01)
6.86 ± 0.25
(0.27 ± 0.01)
1 2 3 4 5 67 8
0.51 ± 0.08 (8x)
(0.020 ± 0.003)
-C-
1.27 ± 0.10 (7x)
(0.050 ± 0.004)
1.9 ± 0.25
(0.08 ± 0.01)
6.22 ± 0.25
(0.24 ± 0.01)
-A-
16.61 ± 0.15
(0.654 ± 0.01)
0.25
5.0° ± 3° (10x)
0.6 ± 0.12 (10x)
(0.02 ± 0.005)
DIMENSIONS IN MILLIMETERS (INCHES).
5.94 ± 0.25
(0.23 ± 0.01)
0.13 ± 0.05
(0.005 ± 0.002)
Option 0X2*
0.43 MAX.
(0.017)
NOTE:
THE -B- DATUM IS FORMED BY THE
TWO HIGHEST POINTS OF THE COMBINDED
SURFACE FORMED BY THIS SURFACE AND
THE CORRESPONDING SURFACE OF THE
SAME LEAD ON THE OPPOSITE SIDE
OF THE PACKAGE.
0 = TAPE AND REEL.
7.92 ± 0.25 MAX.
(0.312 ± 0.01)
X = STRIP OF 10.
1 = JEDEC STANDARD ARRAY.
3.4 ± 0.25
(0.14 ± 0.01)
6.86 ± 0.25
(0.27 ± 0.01)
13.21 ± 0.25
(0.52 ± 0.01)
6.4 ± 0.25
(0.25 ± 0.01)
1 2 3 4 5 67 8
1.27 ± 0.10 (7x)
(0.05 ± 0.004)
4.56 ± 0.15
(0.180 ± 0.01)
1.12 ± 0.15
(0.44 ± 0.006)
-B-
3.24 ± 0.25
(0.128 ± 0.01)
-C-
15.13 ± 0.25
(0.596 ± 0.01)
3.12 ± 0.15
(0.123 ± 0.01)
4.00 ± 0.15 3.4 ± 0.15
6.22 ± 0.25
(0.24 ± 0.01)
-A- 5.0° ± 3° (8x)
0.60 ± 0.12
(0.02 ± 0.005)
3.80 ± 0.15
(0.150 ± 0.01)
8.88 ± 0.15
(0.349 ± 0.01)
0.25
COPLANARITY ± 0.05 mm (0.002 INCHES).
DIMENSIONS IN MILLIMETERS (INCHES).
3.43 ± 0.25
(0.14 ± 0.01)
0.51
(0.020
±
±
00..00803)(8x)
5.94 ± 0.25
(0.23 ± 0.01)







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)