DC/DC CONVERTER. HPR217 Datasheet

HPR217 CONVERTER. Datasheet pdf. Equivalent

HPR217 Datasheet
Recommendation HPR217 Datasheet
Part HPR217
Description 3.0 WATT MINIATURE SIP DC/DC CONVERTER
Feature HPR217; Product Data Sheet 3.0 WATT MINIATURE SIP DC/DC CONVERTER HPR2XX FEATURES ! ! ! Four Channels Of .
Manufacture C&D Technologies
Datasheet
Download HPR217 Datasheet





C&D Technologies HPR217
Product Data Sheet
3.0 WATT
MINIATURE SIP DC/DC CONVERTER
HPR2XX
FEATURES
! Four Channels Of Isolated Power
! High Output Power Density: > 9. 4 Watts/Inch3
! Extended Temperature Range:
-25°C To +85°C
! High Efficiency: To 84%
! Low Cost
! High Isolation Voltage: 750V Continuous
Input-to-Output and Channel-to-Channel
! Single In-line Package (SIP)
! Internal Input and Output Filtering
! Non-Conductive Case
The HPR2XX Series is designed for multiple channel applications
that require small size and could benefit from a complete one-
package solution. The HPR2XX Series offers four isolated
channels of output power in a footprint less than the size of many
singular devices. This unregulated series of DC/DC converters
provides three watts of total output power. Each isolated channel
can supply up to 750mW.
The HPR2XX Series uses advanced circuit design and packaging
technology to realize superior reliability and performance. With
only one switching converter on the board, the HPR2XX
eliminates the possibility of separate converters creating beat
frequencies, or "aliasing" in multiple channel applications.
The high efficiency of the HPR2XX Series means less internal
power dissipation than comparable solutions. With reduced heat
to dissipate, the HPR2XX Series can operate at higher
temperatures with no degradation in reliablility. In addition, the
high efficiency of the HPR2XX Series provides greater than 9
watts/inch3 output power density.
The HPR2XX Series offers the user low cost without sacrificing
reliability. The use of surface mounted devices and manufacturing
technologies make it possible to offer premium performance and
low cost.
MECHANICAL
TOP
VIEW
2.210+.010
(56.13)
0.340+.010
(8.64)
PIN CONNECTIONS
1. -VOUT1 5.-VOUT2 9. +VIN 14. -VOUT3 18. -VOUT4
2. COM 1 6. COM2 10.-VIN 15. COM3 19. COM 4
3 +VOUT1 7.+VOUT2
16. +VOUT3 20. +VOUT4
FRONT
VIEW
0.030+.010
(0.76)
0.155+.015
(3.94)
0.020+.002
(0.51)
BOTTOM
VIEW
1 2 3 5 6 7 9 10
14 15 16 18 19 20
0.400+.010
(10.16)
0.340+.010
(8.64)
RIGHT
SIDE
VIEW
0.010+.002
(0.25)
0.140+.020
(0.25)
0.050+.015
(1.27)
All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
PIN PLACEMENT TOLERANCE: ± 0.015"
Marked with: specific model ordered, date code, and job code.
Power Electronics Division, United States
3400 E Britannia Drive, Tucson, Arizona 85706
Phone: 800.547.2537 Fax: 520.770.9369
HPR2XX REV D 4/99
Internet: http://www.cdpowerelectronics.com
Power Electronics Division, Europe
C&D Technologies (Power Electronics) Ltd.
132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland
Tel: +353.61.474.133
Fax:+353.61.474.141
Page 1



C&D Technologies HPR217
ELECTRICAL SPECIFICATIONS
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
NOMINAL
INPUT
VOLTAGE
RATED
OUTPUT
VOLTAGE
RATED
OUTPUT
CURRENT
INPUT CURRENT
NO LOAD
RATED LOAD
MODEL
(VDC)
(VDC)
(mA)
(mA)
(mA)
REFLECTED
RIPPLE
CURRENT
(mAp-p)
EFFICIENCY
(%)
HPR203
HPR204
HPR205
5 ±5.2 ±73 70 820 35 74
5 ±12 ±30 75 750 35 80
5 ±15 ±25 75 750 35 80
HPR210
HPR211
12
12
±12 ±30 30 305 15 82
±15 ±25 30 300 15 84
HPR216
HPR217
15
15
±12 ±30 20 240 15 83
±15 ±25 20 240 20 84
HPR221
24
±5.0 ±75
20 170
20
74
HPR223
24
±15 ±25 20 155 20 81
Note: Other input to output voltage options may be available. Please consult factory.
COMMON SPECIFICATIONS
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
PARAMETER
CONDITIONS
MIN
INPUT
Voltage Range
Voltage Rise Time
In Rush Current
At Startup
4.5
10.8
13.5
21.6
ISOLATION
Rated Voltage
Test Voltage
Resistance
Capacitance
Leakage Current
OUTPUT
Total Rated Power
Rated Power Each Channel
Voltage Setpoint Accuracy
Ripple & Noise
Voltage
Temperature Coefficent
Input to Output, Channel to Channel
60 Hz, 10 seconds
VISO= 240VAC, 60Hz
Rated Load, Nominal VIN
BW = DC to 10MHz
BW =10Hz to 2MHz
IL=1mA, VOUT = 5V
IL=1mA,
V
OUT
=
12V
IL=1mA,
V
OUT
=
15V
750
750
REGULATION
Line Regulation
Load Regulation (5V out only)
Load Regulation (All other Models)
High Line to Low Line
Rated Load to 1mA Load
Rated Load to 1mA Load
GENERAL
Switching Frequency
Package Weight
Frequency Change
MTTF per MIL-HDBK-217, Rev. E
Ground Benign
Fixed Ground
Naval Sheltered
Airborne Uninhabited Fighter
TEMPERATURE
Specification
Operation
Storage
Rated Load to 1mA Load
High Line to Low Line
Circuit Stress Method
TA = +25°C
TA = +35°C
TA = +35°C
TA = +35°C
-25
-40
-40
TYP
5
12
15
24
10
30
4
3
750
40
7
.05
1
10
3
300
7
5
20
1.8
450
270
45
+25
MAX
5.5
13.2
16.5
26.4
1
±5
8
17
20
+85
+100
+110
UNITS
VDC
VDC
VDC
VDC
V/µsec
Amps
VDC
Vpk
G
pF
µArms
W
mW
%
mVp-p
mVrms
VDC
VDC
VDC
%/Deg C
%/%VIN
%
%
kHz
g
%
%
MHr
kHr
kHr
kHr
°C
°C
°C
ABSOLUTE MAXIMUM RATINGS
Internal Power Dissipation............................................................................1.2W
Short Circuit Protection.......................................................................< 1 second
Lead Temperature (soldering, 10 seconds max)......................................+300°C
ORDERING INFORMATION
Device Family
HPR Indicates DC/DC Converter
Model Number
Selected From Table Above
Screening Option
HPR 2XX /H
Page 2
HPR2XX REVD 4/99



C&D Technologies HPR217
TYPICAL PERFORMANCE CURVES
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
FREQUENCY vx VIN
400
375
350
325
300
4.5 4.75 5.0 5.25 5.5
Vin (VDC)
FREQUENCY vs Pout
420
390
High
Line
CROSS REGULATION HPR205
Channels 2-4: +25mA Load
31.0
30.5
Nominal
Line
360 30.0
330
300
0
Low
Line
.75 1.5 2.25 3.0
Pout (Watts)
29.5
29.0
0
Channel 2-4
Channel 1
6 12 18 26
Input Channel 1 (mA)
LOAD REGULATION
(5 Vout Models)
6.6
14.0
LOAD REGULATION
(12 Vout Models)
16.00
LOAD REGULATION
(15 Vout Models)
6.2 13.4 15.75
5.8 12.8 15.50
5.4 12.2 15.25
5.0
0 20 40
60 80
Iout (mA sum of all Outputs)
11.6
0
8 16 24 32
Iout (mA sum of all Outputs)
15.00
-0 6.25 12.50 18.75 25
Iout (mA sum of all Outputs)
REFLECTED RIPPLE CURRENT vs. Pout
50.0
37.5
EFFICIENCY vs OUTPUT POWER
90.0
67.5
+15Vout
+12Vout
+5Vout
LINE REGULATION
12
6
25.0 45.0
0
12.5 22.5
-6
0
0 0.8 1.7 2.6 3.4
Pout (Watts)
0
0
.85 1.7 2.6 3.5
Pout (Watts)
-12
-10
-5 0 5
Pout (Watts)
10
The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes no responsibility
for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any
of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life support devices/systems
or in aircraft control applications.
HPR2XX REV D 4/99
Page 3





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)