LED Lamps. HLMP-D115 Datasheet

HLMP-D115 Lamps. Datasheet pdf. Equivalent

HLMP-D115 Datasheet
Recommendation HLMP-D115 Datasheet
Part HLMP-D115
Description T-13/4 (5 mm)/ T-1 (3 mm)/ High Performance/ Tinted/ Diffused/ AlInGaP/ and TS AlGaAs Red LED Lamps
Feature HLMP-D115; H T-13/4 (5 mm), T-1 (3 mm), High Performance, Tinted, Diffused, AlInGaP, and TS AlGaAs Red LED Lam.
Manufacture Agilent(Hewlett-Packard)
Datasheet
Download HLMP-D115 Datasheet





Agilent(Hewlett-Packard) HLMP-D115
H
T-13/4 (5 mm), T-1 (3 mm), High
Performance, Tinted, Diffused,
AlInGaP, and TS AlGaAs Red
LED Lamps
Technical Data
HLMA-DX05 Series
HLMA-KX05 Series
HLMP-D1XX Series
HLMP-J100/J150 Series
Features
• High Light Output Over a
Wide Range of Currents
• Popular T-1 and T-1 3/4
Packages
• Choice of Three Colors
Amber
Reddish-Orange
Deep Red
• Wide Viewing Angles
• Long Life: Solid State
Technology
• Available on Tape and Reel
Applications
• Outdoor Message Boards
• Automotive Lighting
• Portable Equipment
• Medical Equipment
• Changeable Message Signs
Description
The HLMA-D/KXXX series tinted,
diffused, solid state lamps utilize
the newly developed aluminum
indium gallium phosphide
(AlInGaP) LED technology. This
technology has a very high
luminous efficiency, capable of
producing high light output over a
wide range of drive currents.
These LED lamps are available
with a choice of two colors, 592
nm amber and 615 nm reddish-
orange, and with two viewing
angles, 65° and 60°.
The HLMP-D/JXXX series tinted,
diffused solid state lamps utilize
the highly optimized transparent
substrate aluminum gallium
arsenide (TS AlGaAs) LED
technology. This technology has a
very high luminous efficiency,
Device Selection Guide
Package Description
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
T-1 (3 mm), Tinted, Diffused,
Standard Current
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
T-1 (3 mm), Tinted, Diffused,
Standard Current
T-1 (3 mm), Tinted, Diffused,
Diffused, Low Current
Viewing
Angle
2θ1/2
65°
60°
40°
Amber
λd = 592 nm
HLMA-
DL05
HLMA-
KL05
25°
55°
55°
Reddish-
Orange
λd = 615 nm
HLMA-
DH05
HLMA-
KH05
Deep
Red
λd = 644 nm
HLMP-
D115
HLMP-
D120
HLMP-
J100
HLMP-
J150
Package
Outline
A
B
A
A
C
C
5964-9287E
1-49



Agilent(Hewlett-Packard) HLMP-D115
capable of producing high light
output over the wide range of
drive currents from 500 µA to
50 mA. The color is deep red at a
dominant wavelength of 644 nm.
TS AlGaAs is a flip-chip LED
technology, die attached to the
anode lead and wire bonded to
the cathode lead. Available view-
ing angles are 25°, 40°, and 55°.
Package Dimensions
5.08 (0.200)
4.57 (0.180)
9.19 (0.362)
8.43 (0.332)
0.89 (0.035)
0.64 (0.025)
6.35 (0.250)
5.58 (0.220)
CATHODE
25.40 MIN.
(1.00)
24.13
(0.95)
MIN.
3.18 (0.125)
2.67 (0.105)
3.43 (0.135)
2.92 (0.115)
4.70 (0.185)
4.19 (0.165)
1.02
(0.040) NOM.
0.45 SQUARE NOMINAL
(0.018)
6.35 (0.250)
5.58 (0.220)
3.18 (0.125)
2.67 (0.105)
3.43 (0.135)
2.92 (0.115)
4.70 (0.185)
4.19 (0.165)
1.02
(0.040) NOM.
0.45
(0.018)
SQUARE
NOMINAL
2(04..9153)MIN.
1.27( 0.050) NOM.
1.27
(0.050)
NOM.
0.45 (0.018)
SQUARE
NOMIMAL
6.10 (0.240)
5.59 (0.220)
CATHODE
2.54 (0.100) NOM.
NOTES:
A
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. AN EPOXY MENISCUS MAY EXTEND ABOUT
1 mm (0.040") DOWN THE LEADS.
CATHODE
ANODE
(02..15040)NOM.
B
ANODE
CATHODE
2.54 NOM.
(0.100)
1.27
(0.050)
NOM.
C
HLMA-DL05/DH05/Kl05/KH05 AlInGaP Lamps
Absolute Maximum Ratings at TA = 25°C
Parameter
HLMA-
DL05
HLMA-
DH05
HLMA-
KL05
HLMA-
KH05
DC Forward Current[1,3,4]
50 50
50 50
Peak Forward Current[2]
200 200
200 200
Average Input Power[2]
103 103
103 103
Reverse Voltage (IR = 100 µA)
Operating Temperature Range
5
-40 to
+100
5
-40 to
+100
5
-40 to
+100
5
-40 to
+100
Storage Temperature Range
-55 to
+100
-55 to
+100
-55 to
+100
-55 to
+100
Junction Temperature
110
Soldering Temperature
[1.59 mm (0.06 in.) below seating plane]
260°C for 5 second
Notes:
1. Derate linearly as shown in Figure 4.
2. Any pulsed operation cannot exceed the Absolute Max Peak Forward current as specified in Figure 5.
3. Drive currents between 10 mA and 30 mA are recommended for best long term performance.
4. Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative.
1-50
Units
mA
mA
mW
V
°C
°C
°C



Agilent(Hewlett-Packard) HLMP-D115
Optical Characteristics at TA = 25°C
Part Number
HLMA-
Luminous
Intensity
IV (mcd)
@ 20 mA[1]
Min. Typ.
Peak
Wavelength
λpeak (nm)
Typ.
DL05
35 100
594
DH05
35 100
621
KL05
35 100
594
KH05
35 100
621
Color,
Dominant
Wavelength
λd[2] (nm)
Typ.
592
615
592
615
Viewing
Angle
2 θ1/2
Degrees[3]
Typ.
65
65
60
60
Luminous
Efficacy
ηv
(lm/w)
480
263
480
263
Notes:
1. φv is the total luminous flux output as measured with an integrating sphere.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
Electrical Characteristics at TA = 25°C
Part
Number
HLMA-
Forward
Voltage
VF (Volts)
@ IF = 20 mA
Typ. Max.
Reverse
Breakdown
VR (Volts)
@ IR = 100 µA
Min. Typ.
Capacitance
C (pF)
VF = 0,
f = 1 mHz
Typ.
DL05 1.9 2.4 5
25
60
DH05 1.9 2.4 5
25
60
KL05 1.9 2.4 5
25
60
KH05 1.9 2.4 5
25
60
Thermal
Resistance
RθJ-PIN (°C/W)
260
260
290
290
Speed of Response
τs (ns)
Time Constant
e-t/τs
Typ.
13
13
13
13
1.0
AMBER
0.5
REDDISH-ORANGE
0
550
594 600
621 630
650
WAVELENGTH – nm
Figure 1. Relative Intensity vs.
Wavelength.
700
200
180
160
140
120
100
80
60
40
20
0
1.0 1.5 2.0 2.5 3.0
VF – FORWARD VOLTAGE – V
Figure 2. Forward Current vs.
Forward Voltage.
1-51





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)