CXP819P60 Microcomputer Datasheet pdf - Chip Microcomputer. Equivalent, Catalog

CXP819P60

CMOS 8-bit Single Chip Microcomputer

Description

The CXP819P60 is a CMOS 8-bit micro-computer

which consists of A/D converter, serial interface,

timer/counter, time base timer, vector interruption,

high precision timing pattern generation circuit,

PWM generator, PWM for tuner, 32kHz timer/event

counter, remote control receiving circuit, general

purpose prescaler, and external signal, as well as

basic configurations like 8-bit CPU, PROM, RAM

and I/O port. They are integrated into a single chip.

Also the CXP819P60 provides sleep/stop function

which enables to lower power consumption and

ultra-low speed instruction mode in 32kHz operation.

This IC is the PROM-incorporated version of the

CXP81960 with built-in mask ROM. This provides

the additional feature of being able to write directly

into the program. Thus, it is most suitable for

evaluation use during system development and for

small-quantity production.

100 pin QFP (PIastic)

Structure

Silicon gate CMOS IC

100 pin LQFP (PIastic)

Features

• A wide instruction set (213 instructions) which cover various types of data

— 16-bit operation/multiplication and division/boolean bit operation instructions

• Minimum instruction cycle

250ns at 16MHz operation

122µs at 32kHz operation

• Incorporated PROM capacity 60K bytes

• Incorporated RAM capacity 2048 bytes

• Peripheral functions

— A/D converter

8-bit, 12-channel, successive approximation system

(Conversion time 20.0µs/16MHz)

— Serial Interface

Incorporated buffer RAM (1 to 32 bytes auto transfer) 1-channel

Incorporated 8-bit and 8-stage FIFO for data

(1 to 8 bytes auto transfer) 1-channel

— Timer

8-bit timer, 8-bit timer/counter, 19-bit time base timer,

32kHz timer/counter

— High precision timing pattern generator PPG 19-pin 32-stage programmable

RTG 5-pin 2-channel

— PWM/DA gate output

PWM 12-bit, 2-channel (Repetitive frequency 62kHz/16MHz)

DA gate pulse output 13-bit, 4-channel

— FRC capture unit

Incorporated 26-bit and 8-stage FIFO

— PWM output

14-bit, 1-channel

— Remote control receiving circuit

8-bit pulse measurement counter with on-chip, 6-stage FIFO

— General purpose prescaler

7-bit (PG5 input frequency divided, FRC capture possible)

• Interruption

20 factors, 15 vectors, multi-interruption possible

• Standby mode

SLEEP/STOP

• Package

100-pin plastic QFP/LQFP

Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by

any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the

operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.

–1–

E95334-ST

Chip Microcomputer. CXP819P60 Datasheet

CXP819P60 Microcomputer. Datasheet pdf. Equivalent