Chip Microcomputer. CXP829P60 Datasheet

CXP829P60 Microcomputer. Datasheet pdf. Equivalent

CXP829P60 Datasheet
Recommendation CXP829P60 Datasheet
Part CXP829P60
Description CMOS 8-bit Single Chip Microcomputer
Feature CXP829P60; CXP829P60 CMOS 8-bit Single Chip Microcomputer Description The CXP829P60 is a CMOS 8-bit single chip.
Manufacture Sony Corporation
Datasheet
Download CXP829P60 Datasheet




Sony Corporation CXP829P60
CXP829P60
CMOS 8-bit Single Chip Microcomputer
Description
The CXP829P60 is a CMOS 8-bit single chip
microcomputer integrating on a single chip an A/D
converter, serial interface, timer/counter, time base
timer, fluorescent display panel controller/driver, I2C
bus interface, remote control transmission circuit,
remote control reception circuit, and 32kHz
timer/counter besides the basic configurations of 8-bit
CPU, PROM, RAM, and I/O port.
This LSI also provides sleep/stop functions which
enable to lower power consumption.
The CXP829P60 is the PROM-incorporated version
of the CXP82960 with built-in mask ROM, and it is
able to write directly into the program. Thus, it is most
suitable for evaluation use during system
development and for small-quantity production.
80 pin QFP (Plastic)
Structure
Silicon gate CMOS IC
Features
Wide-range instruction system (213 instructions) to cover various types of data
— 16-bit arithmetic/multiplication and division/boolean bit operation instructions
Minimum instruction cycle
250ns at 16MHz operation
(122µs at 32kHz operation)
Incorporated PROM capacity
60K bytes
Incorporated RAM capacity
2048 bytes (including fluorescent display area)
Peripheral functions
— A/D converter
8 bits, 8 channels, successive approximation method
(Conversion time of 20µs/16MHz)
— Serial interface
Buffer RAM incorporated (Auto transfer for 1 to 32 bytes), 1 channel
8-bit, 8-stage FIFO incorporated
(Auto transfer for 1 to 8 bytes), 1 channel
— Timers
8-bit timer, 8-bit timer/counter, 19-bit time base timer
32kHz timer/counter
— Fluorescent display panel controller/driver High voltage drive output port of 28 pins (40V)
Maximum of 196 segments display possible
1 to 16-digit dynamic display
Dimmer function
On-chip incorporated pull-down resistor
Hardware key scan function
Maximum of 12 × 8 key matrix supportable
— I2C bus interface
— Remote control transmission circuit
Auto transmission for 1 to 32 bytes,
restart function, carrier output function
— Remote control reception circuit
8-bit pulse measurement counter, 6-stage FIFO
Interruption
16 factors, 15 vectors, multi-interruption possible
Standby mode
SLEEP/STOP
Package
80-pin plastic QFP
Perchase of Sony’s I2C components conveys a licence under the Philips I2C Patent Rights to use these components
in an I2C system, provided that the system conforms to the I2C Standard Specifications as defined by Philips.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E95326-PP



Sony Corporation CXP829P60
CXP829P60
–2–



Sony Corporation CXP829P60
Pin Assignment (Top View)
CXP829P60
PE1/INT1
PE2/INT2
PE3/INT3/NMI
PE4/RMC
PE5
PE6/RMCO
PE7/TO/ADJ
PB0
PB1/CS0
PB2/SCK0
PB3/SI0
PB4/SO0
PB5/SCK1
PB6/SI1
PB7/SO1
PA0/AN0
PA1/AN1
PA2/AN2
PA3/AN3
PA4/AN4
PA5/AN5
PA6/AN6
PA7/AN7
AVDD
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65
1 64
2 63
3 62
4 61
5 60
6 59
7 58
8 57
9 56
10 55
11 54
12 53
13 52
14 51
15 50
16 49
17 48
18 47
19 46
20 45
21 44
22 43
23 42
24 41
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
T7
T8/S19
T9/S18
T10/S17
T11/S16
T12/S15
T13/S14
T14/S13
T15/S12
S11
S10
S9
S8
PD7/S7
PD6/S6
PD5/S5
PD4/S4
PD3/S3
PD2/S2
PD1/S1
PD0/S0
VFDP
PC7/KR7
PC6/KR6
Note) Vpp (Pin 75) must be connected to VDD.
–3–





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)