DatasheetsPDF.com

AN77L06 Dataheets PDF



Part Number AN77L06
Manufacturers Panasonic Semiconductor
Logo Panasonic Semiconductor
Description Low dropout voltage regulator
Datasheet AN77L06 DatasheetAN77L06 Datasheet (PDF)

Voltage Regulators AN77L00/AN77L00M Series 3-pin Low Power Loss Voltage Regulato r (100mA Type) s Overview The AN77L00/AN77L00M series is a stabilized constant voltage power supply with a low input/output voltage(0.3V max.). It is suitable for the low-voltage equipment using batteries, and consumer/industrial equipment with great fluctuation of the supply voltage. A wide range of output voltage is available from 3V through 10V. AN77L00 Series 5.0±0.2 5.1±0.2 4.0±0.2 Unit : mm s Features • Mini.

  AN77L06   AN77L06


Document
Voltage Regulators AN77L00/AN77L00M Series 3-pin Low Power Loss Voltage Regulato r (100mA Type) s Overview The AN77L00/AN77L00M series is a stabilized constant voltage power supply with a low input/output voltage(0.3V max.). It is suitable for the low-voltage equipment using batteries, and consumer/industrial equipment with great fluctuation of the supply voltage. A wide range of output voltage is available from 3V through 10V. AN77L00 Series 5.0±0.2 5.1±0.2 4.0±0.2 Unit : mm s Features • Minimum input/output voltage difference : 0.3V(max.) • Built-in overcurrent limiting circuit • Built-in rush current preventive circuit at saturation voltage rise time • Built-in overheat protective circuit • Built-in input short-circuit protective circuit 2.54 0.45 – 0.1 +0.2 13.5±0.5 2.3±0.2 2 3 1 3-pin SIL Plastic Package (TO-92) (SSIP003-P-0000) AN77L00M Series Unit : mm 4.6max. 1.8max. 4.25max. 2.6max. 1.6max. 2.6 4.5 0.48max. 0.58max. 1.5 3.0 1 2 3 3-pin SIL Mini Power Type Plastic Package (TO-220F) (SSIP003-P-0000D) 0.8min. 0.44max. 1 AN77L00/AN77L00M Series s Block Diagram Voltage Regulators Input Short-Circuit Protection Over Current Protection Error Amp. + – Voltage Reference Over Current Protection Starter Rush Current Protection Thermal Protection 3 IN (1) 2 GND (3) 1 OUT (2) The pin numbers in are for the AN77L00M series. The pin numbers in ( ) are for the AN77L00 series. s Absolute Maximum Ratings (Ta=25˚C) Parameter Supply voltage Supply current Power dissipation Note1) Operating ambient temperature Storage temperature Note 1) Symbol VIN IIN PD Topr Tstg Rating 30 200 650 –30 to + 85 –55 to + 150 Unit V mA mW ˚C ˚C s Recommended Operating Range (Ta= 25˚C) Part No. AN77L03/M AN77L035/M AN77L04/M AN77L045/M AN77L05/M AN77L06/M AN77L07/M AN77L08/M AN77L09/M AN77L10/M AN77L12/M Output voltage (VO) 3 3.5 4 4.5 5 6 7 8 9 10 12 Operating supply voltage range (VI) VO + 0.3 to 13.62 VO + 0.41 to 14.14 VO + 0.3 to 14.66 VO + 0.43 to 15.18 VO + 0.3 to 15.7 VO + 0.46 to 16.74 VO + 0.48 to 17.78 VO + 0.51 to 18.82 VO + 0.53 to 19.86 VO + 0.55 to 20.9 VO + 0.6 to 22.98 Unit V V V V V V V V V V V 2 Voltage Regulators s Electrical Characteristics (Ta=25˚C) • AN77L03/M (3V, 100mA Type) Parameter Output voltage Input stability Load stability Bias current under no load Bias current fluctuation under load Bias current before regulation start Ripple rejection ratio Min. input/output voltage difference (1) Min. input/output voltage difference (2) Output noise voltage Output voltage temperature coefficient Symbol VO REGIN REGL Ibias ∆Ibias Irush RR VDIF (min) 1 VDIF (min) 2 Vno ∆VO/Ta Tj=25˚C Condition AN77L00/AN77L00M Series min 2.88 typ 3 2 8 0.9 3 1.5 max 3.12 60 60 1.5 5 5 0.25 0.3 Unit V mV mV mA mA mA dB V V µV mV/˚C VI=3.62 to 13.62V, Tj=25˚C IO=0 to 100mA, Tj=25˚C IO=0mA, Tj=25˚C IO=0 to 100mA, Tj=25˚C VI=2.7V, IO=0mA, Tj=25˚C VI=3.62 to 5.62V, f=120Hz VI=2.7V, IO=50mA, Tj=25˚C VI=2.7V, IO=100mA, Tj=25˚C f=10Hz to 100kHz Tj= –30 to+125˚C 60 70 0.12 0.22 70 0.2 Note 1) Under Tj=25˚C, each test duration can be set short (within 10ms) and the characteristic drift with temperature rise at joints of the chip may be ignored. Note 2) VI=4V, IO=50mA, CO=10µF unless otherwise specified. • AN77L035/M (3.5V, 100mA Type) Parameter Output voltage Input stability Load stability Bias current under no load Bias current fluctuation under load Bias current before regulation start Ripple rejection ratio Min. input/output voltage difference (1) Min. input/output voltage difference (2) Output noise voltage Output voltage temperature coefficient Symbol VO REGIN REGL Ibias ∆Ibias Irush RR VDIF (min) 1 VDIF (min) 2 Vno ∆VO/Ta Tj=25˚C VI= 4.14 to 14.14V, Tj=25˚C IO= 0 to 100mA, Tj= 25˚C IO= 0mA, Tj= 25˚C IO= 0 to 100mA, Tj= 25˚C VI= 3.15V, IO= 0mA, Tj=25˚C VI= 4.14 to 6.14V, f=120Hz VI= 3.15V, IO= 50mA, Tj= 25˚C VI= 3.15V, IO=100mA, Tj= 25˚C f=10Hz to 100kHz Tj= –30 to+125˚C 59 Condition min 3.36 typ 3.5 3 9 0.9 3 1.5 69 0.12 0.22 75 0.23 0.25 0.41 max 3.64 60 60 1.5 5 5 Unit V mV mV mA mA mA dB V V µV mV/˚C Note 1) Under Tj=25˚C, each test duration can be set short (within 10ms) and the characteristic drift with temperature rise at joints of the chip may be ignored. Note 2) VI=4.5V, IO=50mA, CO=10µF unless otherwise specified. • AN77L04/M (4V, 100mA Type) Parameter Output voltage Input stability Load stability Bias current under no load Bias current fluctuation under load Bias current before regulation start Ripple rejection ratio Min. input/output voltage difference (1) Min. input/output voltage difference (2) Output noise voltage Output voltage temperature coefficient Symbol VO REGIN REGL Ibias ∆Ibias Irush RR VDIF (min) 1 VDIF (min) 2 Vno ∆VO/Ta Tj=25˚C VI= 4.66 to 14.66V, Tj= 25˚C IO= 0 to 100mA, Tj= 25˚C IO= 0mA, Tj= 25˚C IO= 0 to 100mA, Tj=25˚C VI=3.6V, IO= 0mA, Tj= 25˚C VI= 4.66 to 6.66V, f=120Hz VI=3.6V, IO=50mA, Tj= 25˚C VI=3.6V, IO=100mA, Tj= 25˚C f=10Hz to 100kHz Tj= –30 to+125˚C 59 Condition.


AN77L05M AN77L06 AN77L06M


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)