DatasheetsPDF.com

AN80M30RSP Dataheets PDF



Part Number AN80M30RSP
Manufacturers Panasonic Semiconductor
Logo Panasonic Semiconductor
Description 5-pin/ low dropout voltage regulator
Datasheet AN80M30RSP DatasheetAN80M30RSP Datasheet (PDF)

Voltage Regulators AN80MxxRSP Series 5-pin, low dropout voltage regulator with standby function (500 mA type) I Overview The AN80MxxRSP series is a 0.5 A, low dropout voltage regulator IC with standby function, featuring low current consumption and low noise. 6.50±0.10 5.40±0.10 (4.35) (3.00) 1.80±0.10 (2.50) Unit: mm 0.50±0.10 1.00±0.10 I Features • Standby consumption current: max. 3 µA • Dropout voltage: 0.25 V • Output voltage accuracy: ±3% • 5-pin surface mounting package • Ripple reject.

  AN80M30RSP   AN80M30RSP


Document
Voltage Regulators AN80MxxRSP Series 5-pin, low dropout voltage regulator with standby function (500 mA type) I Overview The AN80MxxRSP series is a 0.5 A, low dropout voltage regulator IC with standby function, featuring low current consumption and low noise. 6.50±0.10 5.40±0.10 (4.35) (3.00) 1.80±0.10 (2.50) Unit: mm 0.50±0.10 1.00±0.10 I Features • Standby consumption current: max. 3 µA • Dropout voltage: 0.25 V • Output voltage accuracy: ±3% • 5-pin surface mounting package • Ripple rejection ratio: 30 dB (f = 500 kHz) • Output voltage: 1.8 V, 1.9 V, 2.0 V, 2.1 V, 2.2 V, 2.5 V, 2.7 V, 2.8 V, 2.9 V, 3.0 V, 3.1 V, 3.2 V, 3.3 V, 3.4 V, 3.5 V, 3.6 V, 4.8 V, 4.9 V, 5.0 V, 5.1 V, 5.2 V, 5.3 V 5.50±0.10 (5.50) 9.80±0.20 (2.50) 3 1 2 4 5 (0.75) 5.08±0.10 2.30±0.10 (0.80) 1.27±0.10 0.50±0.10 0.50±0.10 0.10±0.10 SP-5SU I Applications • General use power supply Note) The package of this product will be changed to lead-free type (SP-5SUA). See the new package dimensions section later of this datasheet. I Block Diagram Input short-circuit protection Output stage Voltage reference Output driver Overcurrent limitter Inrush current protection Thermal protection R2 R1 Starter VREF Error amplifier 1 VIN CIN 3.3 µF 2 3 (Fin) 4 5 VOUT COUT 33 µF Cont. CNR 1 µF Publication date: November 2001 SFF00009CEB 1.00±0.20 1 AN80MxxRSP Series I Pin Descriptions Pin No. 1 2 3 4 5 Input voltage pin (VIN) Control pin (Cont.) High: operation, Low: stop Electrically in common with radiation fin Open when the noise reduction function is not used Description Grounding pin (GND) Noise reduction pin (N.R.) Output voltage pin (VOUT) I Absolute Maximum Ratings Parameter Supply voltage Supply current Power dissipation *1 *2 Symbol VCC ICC PD Topr Tstg Rating 14.4  255 −30 to +85 −55 to +150 Unit V mA mW °C °C Operating ambient temperature Storage temperature *2 Note) 1. The output voltage may exceed the rated value if Tj > 150°C in no-load condition. Set to IO > 5 mA if Tj is likely to exceed 150°C. 2. This IC is not suitable for automobile equipment use. 3. *1: The above power dissipation shows the value of an independent IC without heat sink at Ta = 85°C. For details, refer to "2. Power dissipation of SP-5SU package" in the Application Notes. *2: Except for the operating ambient temperature and storage temperature, all ratings are for Ta = 25°C. 2 SFF00009CEB AN80MxxRSP Series I Recommended Operating Conditions Part No. AN80M18RSP AN80M19RSP AN80M20RSP AN80M21RSP AN80M22RSP AN80M25RSP AN80M27RSP AN80M28RSP AN80M29RSP AN80M30RSP AN80M31RSP AN80M32RSP AN80M33RSP AN80M34RSP AN80M35RSP AN80M36RSP AN80M48RSP AN80M49RSP AN80M50RSP AN80M51RSP AN80M52RSP AN80M53RSP Output voltage 1.8 1.9 2.0 2.1 2.2 2.5 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 4.8 4.9 5.0 5.1 5.2 5.3 Operating supply voltage range (VCC) 2.3 to 14.0 2.4 to 14.0 2.5 to 14.0 2.6 to 14.0 2.7 to 14.0 3.0 to 14.0 3.2 to 14.0 3.3 to 14.0 3.4 to 14.0 3.5 to 14.0 3.6 to 14.0 3.7 to 14.0 3.8 to 14.0 3.9 to 14.0 4.0 to 14.0 4.1 to 14.0 5.3 to 14.0 5.4 to 14.0 5.5 to 14.0 5.6 to 14.0 5.7 to 14.0 5.8 to 14.0 Unit V V V V V V V V V V V V V V V V V V V V V V SFF00009CEB 3 AN80MxxRSP Series I Electrical Characteristics at Ta = 25°C • AN80M18RSP (1.8 V type) Unless otherwise specially provided, shorten each test time (within 10 ms) so that the test is conducted under the condition that the drift due to the temperature increase in the chip junction part can be neglected. CIN = 3.3 µF, CNR = Open, COUT = 33 µF Parameter Output voltage Line regulation Load regulation Peak output current Symbol VOUT REGIN IPEAK Conditions VIN = 2.8 V, IOUT = 250 mA VIN = 2.8 V → 14.0 V, IOUT = 250 mA VIN = 2.8 V, The output current value when VOUT decreases by 5% from its value at IOUT = 250 mA. VIN = 2.8 V, IOUT = 0 mA Min 1.746   600 Typ 1.8   900 Max 1.854 18 36  Unit V mV mV mA REGLOA VIN = 2.8 V, IOUT = 0 mA → 500 mA Bias current under no load Bias current fluctuation to input Bias current fluctuation to load Standby consumption current Bias current before starting regulation Control terminal current Ripple rejection ratio 1 Minimum input/ output voltage difference 1 Minimum input/ output voltage difference 2 Control terminal threshold high voltage Control terminal threshold low voltage • Design reference data IBIAS  −5     58.8    0.50 1.1       0.25  1.45 0.70 3.0 5 25 3.0 5 30  0.45 0.8 1.80  mA mA mA µA mA µA dB V V V V ∆IBIAS(IN) VIN = 2.8 V → 14.0 V, IOUT = 250 mA ∆IBIAS(LOA) VIN = 2.8 V, IOUT = 0 mA → 500 mA ISTB IRUSH ICONT RR1 VIN = 14.0 V, VCONT = 0 V VIN = 1.71 V, IOUT = 0 A VIN = 2.8 V, IOUT = 250 mA VCONT = 1.8 V VIN = 3.8 V±1 V, f = 120 Hz IOUT = 100 mA VDIF(min)1 VIN = 1.9 V, IOUT = 250 mA VDIF(min)2 VIN = 2.0 V, IOUT = 500 mA VCONTH VCONTL VIN = 2.8 V VIN = 2.8 V Note) The following values are typical and not guaranteed values. Parameter Ripple rejection ratio 2 Output noise voltage Output voltage temperature coefficient Ou.


AN80M29RSP AN80M30RSP AN80M31RSP


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)