AmMC002AWP

PRELIMINARY AmMC0XXA 2, 4, or 8 Megabyte 5.0 Volt-only Flash Miniature Card DISTINCTIVE CHARACTERISTICS s 2, 4, or 8 Mbytes of addressable Flash memory s 5.0 Volt-only, single power supply operation — Write and read voltage: 5.0 V ± 10% — No additional supply current required for VPP s Fast access time — 100 or 150 ns access time s CMOS low power consumption — Typical active read current: 70 mA (word mode) — Typical active erase/write current: 100 mA (word mode) — Typical standby current: 10 µA (8 Mbyte card) s High write endurance — Guaranteed minimum 100,000 write/erase cycles per card — More than 1,000,000 cycles per card typical s Uniform sector architecture — 64K byte individually useable sectors — Erase Suspend/Resume increases system level performance — BUSY# and RESET# signals s Zero data retention power — No power required to retain data s Available in industrial temperature grade (–40°C to +85°C) s Miniature Card standard form factor — True interchangeability — 60-pad connector — Supports multiple technologies — Sonic welded stainless steel case — PCMCIA Type II adapter available — Selectable byte- or word-wide configuration — Small form factor (38 mm x 33 mm x 3.5 mm) s 60 connection bus — 16-bit data bus — 25-bit address bus — Easy system integration — Low cost implementation — Low cost cards s Consumer-friendly mechanicals — User can easily insert and remove card, upgrade memory, and add applications s Voltage level keying — Does not allow a 5 V card to plug int...