DatasheetsPDF.com

AM52-0023TR-3000 Dataheets PDF



Part Number AM52-0023TR-3000
Manufacturers Tyco Electronics
Logo Tyco Electronics
Description Power Amplifier with T/R Switch for 802.11b
Datasheet AM52-0023TR-3000 DatasheetAM52-0023TR-3000 Datasheet (PDF)

Power Amplifier with T/R Switch for 802.11b Preliminary Release V 1.3 AM52-0023 Features • • • • • • WLAN and Bluetooth Applications Meets 802.11b Spectral Mask Requirements at +20 dBm PA Output Power Integrated SPDT Switch Integrated Detector Downset Leadframe for Excellent Heat Dissipation High Power, Low Power, Shutdown Modes Functional Schematic VDET VSUP PAOUT/ VSUP TX NC SWRX ANT SWTX VCTRL1 VCTRL2 NC VSUP RX VCTRL VSUP 20 VSUP VSUP NC RFIN NC 1 Description The AM52-0023 is a two stag.

  AM52-0023TR-3000   AM52-0023TR-3000



Document
Power Amplifier with T/R Switch for 802.11b Preliminary Release V 1.3 AM52-0023 Features • • • • • • WLAN and Bluetooth Applications Meets 802.11b Spectral Mask Requirements at +20 dBm PA Output Power Integrated SPDT Switch Integrated Detector Downset Leadframe for Excellent Heat Dissipation High Power, Low Power, Shutdown Modes Functional Schematic VDET VSUP PAOUT/ VSUP TX NC SWRX ANT SWTX VCTRL1 VCTRL2 NC VSUP RX VCTRL VSUP 20 VSUP VSUP NC RFIN NC 1 Description The AM52-0023 is a two stage power amplifier designed for 802.11b and other 2.4 GHz applications. This product includes a detector and a T/R switch. Transmit specifications are given at the antenna port and include the switch insertion loss. The small size and height of the AM52-0023 make it ideal for PC card applications. The AM52-0023 has three operating modes; High Power, Low Power, and Shutdown. The High Power Mode has both the first and second PA stages biased on and is achieved by setting both Vctrl1 and Vctrl2 to +3 volts. The Low Power Mode has the first PA stage on and the second PA stage off and is achieved by setting Vctrl1 to +3 volts and Vctrl2 to 0 volts. The Shutdown Mode is achieved by setting both Vctrl1 and Vctrl2 to 0 volts. Pin Configuration Pin No. 3, 5, 9, 14 Function NC RFIN VSUPPLY VCTRL1 VCTRL2 RX SWT X ANT SW RX TX PAOUT /VSUP VDET VCTL GND Description No Connection RF Input to Amplifier DC Supply Power Control, Stage 1 Power Control, Stage 2 Receive Port on Switch Switch Control Switch Antenna Port Switch Control Switch Transmit Port PA Output, DC Supply Detected Output Power Detector Control RF/DC Ground Handling Procedures Please observe the following precautions to avoid damage to the AM52-0023: 4 1, 2, 7, 18, 20 6 8 10 11 12 13 Static Sensitivity Gallium arsenide integrated circuits are ESD sensitive and can be damaged by static electricity. Use proper ESD precautions when handling these devices. Ordering Information Part Number AM52-0023TR Description 7 inch, 1000 piece reel 15 16 17 19 Base AM52-0023TR-3000 13 inch, 3000 piece reel AM52-0023SMB AM52-0023 Sample Test Board Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. 1 Part Description Power Amplifier with T/R Switch for 802.11b Absolute Maximum Ratings 1 Parameter Max Input Power (2.4 -2.5 GHz) Operating Voltages Operating Temperature Channel Temperature Storage Temperature Maximum + 10 dBm +5.5 volts -40 °C to +85 °C +150 °C -40 °C to +150 °C AM52-0023 V 1.3 1. Exceeding any one or combination of these limits may cause permanent damage. Electrical Specifications Parameter Frequency Control voltage range Input Return Loss at RFin Output Power at ANT 1 dB Compresson at ANT Saturated Power at ANT Power Gain at ANT Current, Operating 1,2 : T C=+38°C Test Conditions Units GHz V Min. 2.4 0.0 14 14 Typ. Max. 2.5 3.0 Pin=0 dBm, VCTRL1=3.0V, VCTRL2=3.0V Pin=0 dBm, VCTRL1=3.0V, VCTRL2=0.0V Pin=0 dBm, VCTRL1=3.0V, VCTRL2=3.0V Pin=0 dBm, VCTRL1=3.0V, VCTRL2=0.0V VCTRL1=3.0V, VCTRL2=3.0V VCTRL1=3.0V, VCTRL2=3.0V Pin=0 dBm, VCTRL1=3.0V, VCTRL2=3.0V Pin=0 dBm, VCTRL1=3.0V, VCTRL2=0.0V Pin=0 dBm, VCTRL1=3.0V, VCTRL2=3.0V (High Power Mode) Pin=0 dBm, VCTRL1=3.0V, VCTRL2=0.0V (Low Power Mode) Pin=0 dBm, VCTRL1=0.0V, VCTRL2=0.0V (Shutdown Mode) Pin=0 dBm, VCTRL1=3.0V, VCTRL2=3.0V Pin=0 dBm, VCTRL1=3.0V, VCTRL2=0.0V VCTRL1=3.0V, VCTRL2=0.0V, VTX=0.0V, VRX=3.0V VTX=3.0V, VRX=0.0V VTX=0.0V, VRX=3.0V PIN=0 dBm, POUT=23 dBm, VCTRL1=3.0V, VCTRL2=3.0V Pin=0 dBm, VCTRL1=3.0V, VCTRL2=3.0V At ANT, Compliance with 802.11b DSSS +3.0V


AM52-0023TR AM52-0023TR-3000 AM52-0024


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)