Micrel, Inc.
MIC5219
MIC5219
500mA-Peak Output LDO Regulator
General Description
The MIC5219 is an efficient linear...
Micrel, Inc.
MIC5219
MIC5219
500mA-Peak Output LDO
Regulator
General Description
The MIC5219 is an efficient linear voltage
regulator with high peak output current capability, very-low-dropout voltage, and better than 1% output voltage accuracy. Dropout is typically 10mV at light loads and less than 500mV at full load.
The MIC5219 is designed to provide a peak output current for start-up conditions where higher inrush current is demanded. It features a 500mA peak output rating. Continuous output current is limited only by package and layout.
The MIC5219 can be enabled or shut down by a CMOS or TTL compatible signal. When disabled, power consumption drops nearly to zero. Dropout ground current is minimized to help prolong battery life. Other key features include reversedbattery protection, current limiting, overtemperature shutdown, and low noise performance with an ultra-low-noise option.
The MIC5219 is available in adjustable or fixed output voltages in the space-saving 6-pin (2mm × 2mm) MLF®, 6-pin (2mm × 2mm) Thin MLF® SOT‑23‑5 and MM8® 8‑pin power MSOP packages. For higher power requirements see the MIC5209 or MIC5237.
All support documentation can be found on Micrel’s web site at www.micrel.com.
Features
500mA output current capability SOT-23-5 package - 500mA peak 2mm×2mm MLF® package - 500mA continuous 2mm×2mm Thin MLF® package - 500mA
continuous MSOP-8 package - 500mA continuous Low 500mV maximum dropout voltage at full load Extremely tigh...