High-Voltage Display Driver
MIC8030
Micrel
MIC8030
High-Voltage Display Driver
General Description
The MIC8030 is a CMOS high voltage liquid crys...
Description
MIC8030
Micrel
MIC8030
High-Voltage Display Driver
General Description
The MIC8030 is a CMOS high voltage liquid crystal display driver. Up to 38 segments can be driven from four CMOS level inputs (CLOCK, DATA IN, LOAD and CHIP SELECT). The MIC8030 is rated at 50V. Data is loaded serially into a shift register, and transferred to latches which hold the data until new data is received. The backplane can be driven from external source, or the internal oscillator can be used. If the internal oscillator is used, the frequency of the backplane will be determined by an external resistor and capacitor. The oscillator need not be used if a DC output is desired.
Features
High Voltage Outputs capable of a driving up to 100 volt outputs from 5 to 15 volt logic Drives 30, 32, or 38 segments Cascadable On chip Oscillator or External Backplane Input CMOS construction for wide supply range and low power consumption Schmitt Triggers on all inputs CMOS, PMOS, and NMOS compatible
Applications
Dichroic and Standard Liquid Crystal Displays Flat Panel Displays Print Head Drives Vacuum Fluorescent Displays
Functional Diagram
Data S Data Out 38 Data Out 32 CS S Data Out 30
Ordering Information
Part Number MIC8030-01CV
38 Bit Static Shift Register
Temperature Range Package 0°C to +70°C 44-pin PLCC
Clock
S
Load
S
38 Bit Latch
LCD0 LCD0 Opt Oscillator Voltage Translators Voltage Translator HV Output Driver HV Output Drivers
Segments Back Plane
MIC8030
8-16
Octob...
Similar Datasheet