LTC1758-2

FEATURES s s LTC1758-1/LTC1758-2 RF Power Controllers with 250kHz Control Loop Bandwidth and 40dB Dynamic Range DESCRIPTIO The LTC®1758-2 is a dual band RF power controller for RF power amplifiers operating in the 850MHz to 2GHz range. The loop bandwidth reduction to 250kHz improves frequency stability when controlling slow turn-on PAs such as the Philips BGY280, Conexant RM009/ CX77302, Anadigics AWT6102/AWT6107 and the Hitachi PF08107/PF08123B. The LTC1758-1 is a single output RF power controller that is identical in performance to the LTC1758-2 except that one output (VPCA) is provided. The LTC1758-1 can be used to drive a single RF or dual channel module with integral multiplexer. This part is available in an 8-pin MSOP package. RF power is controlled by driving the RF amplifier power control pins and sensing the resultant RF output power via a directional coupler. The RF sense voltage is peak detected using an on-chip Schottky diode. This detected voltage is compared to the DAC voltage at the PCTL pin to control the output power. The RF power amplifier is protected against high supply current and high power control pin voltages. Internal and external offsets are cancelled over temperature by an autozero control loop, allowing accurate low power programming. The shutdown feature disables the part and reduces the supply current to < 1µA. , LTC and LT are registered trademarks of Linear Technology Corporation. s s s s s s s s s s s s s s s U APPLICATIO S s s s s Dual...