LTPH245

LTPH245 LINE THERMAL PRINTER MECHANISM TECHNICAL REFERENCE U00027926850 Seiko Instruments Inc. LTPH245 TECHNICAL REFERENCE Document Number U00027926850 First Edition December 1999 Copyright © 1999 by Seiko Instruments Inc. All rights reserved. Seiko Instruments Inc. (SII) has prepared this manual for use by SII personnel, licensees, and customers. The information contained herein is the property of SII and shall not be reproduced in whole or in part without the prior written approval of SII. SII reserves the right to make changes without notice to the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical, arithmetic, or listing errors. SII is a trademark of Seiko Instruments Inc. PREFACE This reference manual describes the specifications and basic operating procedures for the LTPH245 Line Thermal Printer Mechanism (hereinafter referred to as “printer”). Chapter 1 “Precautions” describes safety, design and operational precautions. Read it thoroughly before designing so that you are able to use the printer properly. SII has not investigated the intellectual property rights of the sample circuits included in this manual. Fully investigate the intellectual property rights of these circuits before using. iii TABLE OF CONTENTS Section CHAPTER 1 PRECAUTIONS 1.1 1.2 SAFETY PRECAUTIONS ...........................................