Sync Identification for CRT Display
CXA2016S
Sync Identification for CRT Display
Description The CXA2016S is used for sync signal identification and wavefor...
Description
CXA2016S
Sync Identification for CRT Display
Description The CXA2016S is used for sync signal identification and waveform shaping in the CRT computers display for multi-scan system. There are three types of sync input signals for identification: separate sync, composite sync, and sync on video signals. Features Power save function available (5 V power supply) Clamp pulse output position selectable among sync interval, back porch interval, and AUTO. Polarity information of sync signals is output. Polarity and amplitude of input signals: Polarity Amplitude (Vp-p) V. separate sync: Positive/Negative 1 to 5 H. separate sync: Positive/Negative 1 to 5 Composite sync: Positive/Negative 1 to 5 Sync on video: Sync signals part of Negative 0.2 to 0.4 Video part 0 to 1.4 Applications CRT display monitor Pin Configuration (Top View)
1 2 3
VCC 22 VD 21 VSS IN 20 VSS OUT 19
PH 16 Polarity Check Exist Check 18 HD Logic VS IN PV
22 pin SDIP (Plastic)
Absolute Maximum Ratings (Ta=25°C) Supply voltage VCC 12 V Operating temperature Topr –20 to +75 °C Storage temperature Tstg –65 to +150 °C Allowable power dissipation PD 962 mW Operating Conditions Supply voltage
VCC
5 ± 0.25
V
Block Diagram
PVC EVC
VS IN PVC EVC
2
3
1
17
Polarity Check
V. Ramp Generator
Exist Check
21 VD
8 HD SEL
4 CS IN 5 6 7 8
PHC EHC Video IN HD SEL
HD 18
CS IN
4 5 6 7
PV 17
PHC
9 ISC
Clamp Pulse Generator Sync Sep Sync Check Bias 13 CLP OUT 14 CLP OUT
PH 16
EHC
CLP SEL 15
Video IN 15 C...
Similar Datasheet