CXA3562R

CXA3562R LCD Driver Description The CXA3562R is a driver IC developed for use with Sony polycrystalline silicon TFT LCD panels. It supports digital 2-parallel and single input, and the input data is analog demultiplexed into 12 phases and output. The CXA3562R can directly drive an LCD panel, and the VCOM setting circuit and precharge pulse waveform generator are also on-chip. Features Supports 10-bit 2-parallel and single input Supports signals up to UXGA (1/2 clock when using UXGA signals) Low output deviation by on-chip output offset cancel circuit Supports both line inversion and dot and line inversion On-chip timing generator with ECL VCOM voltage generation circuit Precharge pulse waveform generation circuit Applications LCD projectors and other video equipment Absolute Maximum Ratings (VSS = 0V) Supply voltage VCC 16 V VDD 5.5 V Operating temperature Topr –20 to +70 °C Storage temperature Tstg –65 to +150 °C Allowable power dissipation PD 2300 mW Recommended Operating Conditions Supply voltage VCC 15.0 to 15.5 VDD 4.75 to 5.25 Operating temperature Topr –20 to +70 100 pin LQFP (Plastic) V V °C Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising o...