DatasheetsPDF.com

F6584 Dataheets PDF



Part Number F6584
Manufacturers Hamamatsu Corporation
Logo Hamamatsu Corporation
Description WIDE DYNAMIC RANGE MICROCHANNEL PLATES
Datasheet F6584 DatasheetF6584 Datasheet (PDF)

WIDE DYNAMIC RANGE MICROCHANNEL PLATES F6584 SERIES 20 µA Output Current is Available * The F6584 series is a wide dynamic range MCP that offers more than ten - fold increase in maximum output current compared to conventional MCPs. This increased current capability is due to low plate resistance. When operated in pulse counting mode, the F6584 series MCPs also provide maximum counting capability that is more than ten - fold higher than conventional MCPs. The design is optimized to prevent resis.

  F6584   F6584


Document
WIDE DYNAMIC RANGE MICROCHANNEL PLATES F6584 SERIES 20 µA Output Current is Available * The F6584 series is a wide dynamic range MCP that offers more than ten - fold increase in maximum output current compared to conventional MCPs. This increased current capability is due to low plate resistance. When operated in pulse counting mode, the F6584 series MCPs also provide maximum counting capability that is more than ten - fold higher than conventional MCPs. The design is optimized to prevent resistance reduction resulting from high power consumption or high temperature operation. The F6584 series MCPs therefore offer excellent stability and reliability even during high current or high temperature operations. This results in a very wide dynamic range, making these MCPs ideal for various applications such as mass spectrometers and usage for high counting PMTs. FEATURES q Wide Dynamic Range Typ. 20 µA Maximum Output Current * q Operable in high temperature condition (+350°C Max. c) q High Gain and Low Noise * When the MCP resistance is less than 10 MΩ. APPLICATIONS q MS Detector q GC-MS q ESCA q ICP-MS q LC-MS q Mössbauer Detector SPECIFICATIONS GENERAL Parameter Outer Diameter Effective Diameter Plate Thickness Channel Diameter Channel Pitch Bias Angle Open Area Ratio Electrode Material F6584-01 F6584-09 24.9 20 0.48 0.43 12 10 15 12 5,15 60 Inconel Unit mm mm mm µm µm degree % – Figure 1: Typical Current Gain vs. Supply Voltage TMCPB0043EA 104 CHARACTERISTICS (at 1000V, 1.3×10 -4 Pa(1×10 -6 Torr), +25°C) Gain Plate Resistance Maximum Dark Current Maximum Linear Output Signal More than 10 4 2 to 30 5 × 10 -13 10 to 20% of the strip current a – MΩ A/cm2 – CURRENT GAIN 103 MAXIMUM RATINGS (Absolute Values) Supply Voltage b Ambient Temperature C 1000 -50 to +350 V °C 102 500 600 700 800 900 1000 1100 NOTE: a: The strip current is the current flowing through the channel walls, which supplies the current released from the channel walls. It is given by : Supply voltage / Plate resistance. b: At a vacuum of 1.3 × 10 -4 Pa(1 × 10 -6 Torr) or less. C: Single plate operation SUPPLY VOLTAGE (V) Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. © 1998 Hamamatsu Photonics K. K. WIDE DYNAMIC RANGE MICROCHANNEL PLATES F6584 SERIES Figure 2: MCP Saturation Characteristics (D.C. MODE) TMCPB0041EB Figure 3: MCP Saturation Characteristics (COUNTING MODE) 108 TMCPB0042EC 150 NUMBER OF COUNTS (cps) WIDE DYNAMIC RANGE MCP R=10.8 MΩ VMCP=800 V RELATIVE GAIN [%] 107 STANDARD MCP RESISTANCE : 400 MΩ/ 2 STAGE MCP GAIN : 5×106 100 STANDARD MCP R=550 MΩ VMCP=800 V 50 106 105 F6584 WIDE DYNAMIC RANGE MCP RESISTANCE : 22.4 MΩ/ 2 STAGE MCP GAIN : 8×106 10-7 10-6 10-5 10-4 0 10-8 10-7 10-6 10-5 10-4 104 10-8 OUTPUT CURRENT [A] OUTPUT CHARGE (C/s) Figure 4: MCP Dimensional Outline (Unit : mm) INDICATOR* T EFFECTIVE AREA ELECTRODE INPUT SIDE T 24.9 20 θ F6584-01 F6584-09 0.48 0.43 θ : Bias Angle *This indicator shows the MCP input side and the direction of channel bias. TMCPA0030EB PRECAUTIONS FOR USE q Avoid touching the MCP or MCP assembly with bare hands. q Handle the MCP only in a clean room since dust and humidity may adversely affect MCP characteristics. q The MCP should be operated in vacuum below 1.33 x 10 -4 Pa(1 × 10 -6 torr). q The MCP should be kept in vacuum or dry nitrogen gas atmosphere during long periods of storage. q When outgassing from the MCP occurs, baking the MCP at 400°C maximum in a vacuum system is recommended. In addition electron bombarding may be effective. HAMAMATSU PHOTONICS K.K., Electron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: (44)181-367-3560, Fax: (44)181-367-6384 North Europe: Hamamatsu Photonics Norden AB: Färögatan 7, S-164-40 Kista, Sweden, Telephone: (46)8-703-29-50, Fax: (46)8-750-58-95 Italy: Hamamatsu Photonics Italia S.R.L.: Via Della Moia, 1/E 20020 Arese, (Milano), Italy, Telephone: (39)2-935 81 7.


F6492 F6584 F6584-01


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)