Precision Micropower Shunt Voltage Reference
www.fairchildsemi.com
FAN4041
Precision Micropower Shunt Voltage Reference
Features
• • • • • • Adjustable shunt refere...
Description
www.fairchildsemi.com
FAN4041
Precision Micropower Shunt Voltage Reference
Features
Adjustable shunt reference Tolerances to +0.5% (25°C) Low output noise Low temperature coefficient to 100 ppm/°C max Small packages Extended operating current range
Description
The FAN4041 adjustable precision shunt references are ideal for space- and cost-sensitive applications. They are available with output voltage tolerances of 0.5% and 1%. They also have excellent temperature coefficients, to 100ppm/°C for the tighter tolerance grades. The FAN4041 series has an extended operating current range, sinking as much as 25mA. The FAN4041 series is available in SOT-23 and TO-92 packages.
Applications
Portable equipment Disk drives Instrumentation Audio equipment Data acquisition systems
Connection Diagrams
SOT-23
FB 1 3 – + 2
Top View
TO-92
FB 3 + 2 – 1
Bottom View
REV. 1.0.2 9/10/01
FAN4041
PRODUCT SPECIFICATION
Absolute Maximum Ratings1
Ratings are over full operating free-air temperature range unless otherwise noted. Parameter Continuous cathode current, IK Power dissipation Maximum Output Voltage (FAN4041) Storage Temperature Range Lead Temperature (Soldering, 10 sec.) -65 Min. -30 Max. 30 12 150 300 Unit
mA
See Dissipation Rating Table V °C °C
Notes: 1. Functional operation under these conditions is not implied. Permanent damage may occur if the device is subjected to conditions outside these ratings.
Recommended Operating Conditions
Parameter Continuous cat...
Similar Datasheet