E - Series Surface Mount Mixer 890 - 915 MHz
E - Series Surface Mount Mixer 890 - 915 MHz ESMD-C2HX2 ESMD - C2HX2
SM-2 Features
• • •
Lo Power +17 dBm Up to +14dBm R...
Description
E - Series Surface Mount Mixer 890 - 915 MHz ESMD-C2HX2 ESMD - C2HX2
SM-2 Features
Lo Power +17 dBm Up to +14dBm RF Surface Mount
Specifications @ 25°C
Frequency Range RF LO IF Conversion Loss (dB) 890-915 MHz Isolation (dB) LO To RF 819-844 MHz LO To IF 25 Typical Typical 890-915 MHz 819-844 MHz 71 MHz Minimum 7.5 Minimum
Function LO RF IF Ground Case Ground Unconnected
Pin No.
2 1 3 4,5,6 -
15
Absolute Maximum Ratings
Parameter Absolute Maximum 50 mW 40 mA -55°C to 100°C -55°C to 100°C 260°C RF Power
Operating Characteristics
Impedance RF Input for 1 dB Compression 50 O Nominal + 14 dBm
Peak IF Current Storage Temperature Operating Temperature Pin Temperature (10 seconds)
Note: Specifications subject to change without notice
E-Series Surface Mount Mixer
890 - 915 MHz
ESMD-C2HX2
Two Tone Third Order Input Intercept: Test Conditions
RF1 RF2 LO 890 MHz @ 0 dBm 891 MHz @ 0 dBm 820 MHz @ +17 dBm
IIP3 Spec: +29 dBm TYPical, +27 dBm Min
Voltage Standing Wave Ratio’s
LO VSWR RF VSWR IF VSWR Max Max Max 2.0:1 1.7:1 2.0:1
Specifications subject to change without notice. n North America: Tel. (800) 366-2266, Fax (800) 618-8883 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Visit www.macom.com for additional data sheets and product information.
...
Similar Datasheet