E-Series RF 1.5:1 Step-down Auto-Transformer 5 - 1000 MHz
E-Series RF 1.5:1 Transformer — 5 - 1000 MHz
ETC1.5-4
ETC1.5-4
E-Series RF 1.5:1 Step-down Auto-Transformer 5 - 1000 ...
Description
E-Series RF 1.5:1 Transformer — 5 - 1000 MHz
ETC1.5-4
ETC1.5-4
E-Series RF 1.5:1 Step-down Auto-Transformer 5 - 1000 MHz
Features
Surface Mount 1.5:1 Impedance Ratio Available on Tape & Reel
SM-22 Package
0.030 0.050 (1.27) (0.762)
0.150 (3.81)
0.030 (0.762)
0.150 MAX (3.81 MAX)
0.150 (3.81) 0.030 (0.762)
0.065 (1.65)
0.055 (1.397)
0.190 (4.83)
Description
M/A-COM’s ETC1.5-4 is a 1.5:1 RF step-down auto- transformer in a low cost, surface mount package. Ideally suited for high volume applications.
0.100 (2.54) 0.130 (3.30) 0.030 (0.762)
Schematic
Electrical Specifications @25°C
Parameter Frequency Range 5 - 1000 Insertion Loss 5 - 1000 MHz Units MHz dB Nominal — — Typical — — Minimum — — Maximum — 1.0
Please Note that the photograph above indicates package shape only, unit may be wired differently.
V2.00
S 0995 H
M/A-COM Division of AMP Incorporated s North America: Tel. (800) 366-2266, Fax (800) 618-8883 s Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 s Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice.
E-Series RF 1.5:1 Transformer — 5 - 1000 MHz
ETC1.5-4
Absolute Maximum Ratings
Parameter RF Power DC Current Storage Temperature Absolute Maximum 250 mW 100 mA -55°C to +100°C
Functional Configuration
Function Primary Dot Primary Primary CT Secondary Dot Secondary Secondary CT Case Ground Not Connected Pin No. 3...
Similar Datasheet