ER1001

ER1000 THRU ER1004 SUPERFAST RECOVERY RECTIFIERS VOLTAGE: 50 to 400 Volts CURRENT: 10.0 Amperes FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound Exceeds environmental standards of MIL-S-19500/228 Low power loss, high efficiency Low forward voltage, high current capability High surge capacity Super fast recovery times, high voltage Epitaxial chip construction TO-220AB .419(10.66) MAX .139(3.55) MIN .196(5.0) MAX .054(1.39) MAX MECHANICAL DATA Case: TO-220AB molded plastic Terminals: Lead, solderable per MIL-STD-202, Method 208 Polarity: As marked Mounting Position: Any Weight: 0.08 ounces, 2.24 grams .038(0.96) MAX. .177(4.5) MAX .50(12.7) MAX .269(6.85) MAX .624(15.87) MAX .025(0.65) MAX .1(2.54) .1(2.54) AC + Positive CT AC MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25OC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, Resistive or inductive load. For capacitive load, derate current by 20%. ER1000 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Recitified TC=100 C Peak Forward Surge Current, IFM (surge):8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 10.0A per element. Maximum DC Reverse Current at Rated TA=25 OC DC Blocking Voltage per element TA=125 OC Typical Junction capacitance (Note 1) Maximum Reverse Re...