DS90CP22

2X2 800 Mbps LVDS Crosspoint Switch March 2000 DS90CP22 2X2 800 Mbps LVDS Crosspoint Switch General Description DS90CP22 is a 2x2 crosspoint switch utilizing LVDS (Low Voltage Differential Signaling) technology for low power, high speed operation. Data paths are fully differential from input to output for low noise generation and low pulse width distortion. The non-blocking design allows connection of any input to any output or outputs. LVDS I/O enable high speed data transmission for point-to-point interconnects. This device can be used as a high speed differential crosspoint, 2:1 mux, 1:2 demux, repeater or 1:2 signal splitter. The mux and demux functions are useful for switching between primary and backup circuits in fault tolerant systems. The 1:2 signal splitter and 2:1 mux functions are useful for distribution of serial bus across several rack-mounted backplanes. The DS90CP22 accepts LVDS signal levels, LVPECL levels directly or PECL with attenuation networks. The individual LVDS outputs can be put into TRI-STATE by use of the enable pins. For more details, please refer to the Application Information section of this datasheet. Features n Low jitter 800 Mbps fully differential data path n 75 ps (typ) of pk-pk jitter with PRBS = 223−1 data pattern at 800 Mbps n Single +3.3 V Supply n Less than 330 mW (typ) total power dissipation n Non-blocking ’’Switch Architecture’’ n Balanced output impedance n Output channel-to-channel skew is 35 ps (typ) n Configurable as 2:1 mux,...