Low power dual voltage comparator
Philips Semiconductors Linear Products
Product specification
Low power dual voltage comparator
AU2903
DESCRIPTION
Th...
Description
Philips Semiconductors Linear Products
Product specification
Low power dual voltage comparator
AU2903
DESCRIPTION
The AU2903 consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0mV max. for two comparators which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These comparators also have a unique characteristic in that the input common-mode voltage range includes ground, even though operated from a single power supply voltage.
PIN CONFIGURATION
D and N Packages
OUTPUT A INVERTING INPUT A NON–INVERTING INPUT A GND 1 2 3 4 A B 8 7 6 5
V+ OUTPUT B INVERTING INPUT B NON–INVERTING INPUT B
FEATURES
TOP VIEW
Wide single supply voltage range 2.0VDC to 36VDC or dual Very low supply current drain (0.8mA) independent of supply Low input biasing current 25nA Low input offset current ±5nA and offset voltage ±2mV Input common-mode voltage range includes ground Differential input voltage range equal to the power supply voltage Low output 250mV at 4mA saturation voltage Output voltage compatible with TTL, DTL, ECL, MOS and CMOS
logic systems
– INPUT Q8 Q7 Q5 Q6
supplies ±1.0VDC, to ±18VDC
EQUIVALENT CIRCUIT
V+
voltage (2.0mW/comparator at 5.0VDC)
3.5µA
100µA
3.5µA
100µA
Q2
Q3 Q4 OUTPUT
+ INPUT
Q1
APPLICAT...
Similar Datasheet