Dual Master-Slave J-K Flip-Flop
DM7476 Dual Master-Slave J-K Flip-Flops with Clear, Preset, and Complementary Outputs
September 1986 Revised February 2...
Description
DM7476 Dual Master-Slave J-K Flip-Flops with Clear, Preset, and Complementary Outputs
September 1986 Revised February 2000
DM7476 Dual Master-Slave J-K Flip-Flops with Clear, Preset, and Complementary Outputs
General Description
This device contains two independent positive pulse triggered J-K flip-flops with complementary outputs. The J and K data is processed by the flip-flop after a complete clock pulse. While the clock is LOW the slave is isolated from the master. On the positive transition of the clock, the data from the J and K inputs is transferred to the master. While the clock is HIGH the J and K inputs are disabled. On the negative transition of the clock, the data from the master is transferred to the slave. The logic state of J and K inputs must not be allowed to change while the clock is HIGH. The data is transferred to the outputs on the falling edge of the clock pulse. A LOW logic level on the preset or clear inputs will set or reset the outputs regardless of the logic levels of the other inputs.
Ordering Code:
Order Number DM7476N Package Number N16E Package Description 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Connection Diagram
Function Table
Inputs PR L H L H H H H CLR H L L H H H H CLK X X X J X X X L H L H K X X X L L H H Outputs Q H L Q L H
H = HIGH Logic Level L = LOW Logic Level X = Either LOW or HIGH Logic Level = Positive pulse data. The J and K inputs must be held constant while the clock is HIGH. Data is transferre...
Similar Datasheet