DM74ALS1035 Hex Non-Inverting Driver with Open Collector Outputs
September 1986 Revised February 2000
DM74ALS1035 Hex ...
DM74ALS1035 Hex Non-Inverting Driver with Open Collector Outputs
September 1986 Revised February 2000
DM74ALS1035 Hex Non-Inverting Driver with Open Collector Outputs
General Description
These devices contain six independent drivers, each of which performs the logic identity function. The outputs require an external pull-up resistor for proper logical operation.
Features
s Switching specifications at 50 pF s Switching specifications guaranteed over full temperature and VCC range s Advanced oxide-isolated, ion-implanted
Schottky TTL process s Functionally and pin for pin compatible with
Schottky and low power
Schottky TTL counterpart s Improved AC performance over
Schottky and low power
Schottky counterparts
Ordering Code:
Order Number DM74ALS1035M DM74ALS1035N Package Number M14A N14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram
Function Table
Y=A Input A L H
L = LOW Logic Level H = HIGH Logic Level
Output Y L H
© 2000 Fairchild Semiconductor Corporation
DS006260
www.fairchildsemi.com
DM74ALS1035
Absolute Maximum Ratings(Note 1)
Supply Voltage Input Voltage OFF-State Output Voltage Operating Free Air Temperature Range Storage Temperature Range Typical θJA N Package M Package 76.0°C/W 106.5°C/W 7V 7V 7V 0°C to +70°C −65°C ...