AZ954
SUBMINIATURE POWER RELAY
FEATURES • • • • • • • • • Subminiature size for high density packaging Coil sensitivity to 114 mW Extremely low cost Coils to 24 VDC Epoxy sealed for automatic wave soldering 2 Amp contacts Class B and F insulation available Life expectancy to 10 million operations UL, CUR file E43203 GENERAL DATA
SPDT (1 Form C) Resistive load: Max. switched power: 30 W or 125 VA Max. switched current: 1 A Max. switched voltage: 150 VDC* or 300 VAC UL Rating: 1 A at 125 VAC General Use 1 A at 30 VDC Resistive Max. switched power: 30 W or 250 VA Max. switched current: 2 A Max. switched voltage: 150 VDC* or 300 VAC UL Rating: 2 A at 125 VAC General Use 1 A at 30 VDC Resistive. Silver alloy < 100 milliohms initially Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at rated load 5 ms at nominal coil voltage 1 ms at nominal coil voltage (with no coil suppressions)
CONTACTS
Arrangement Ratings Light Duty
Medium Duty
Dielectric Strength 1250 Vrms coil to contact (at sea level for 1 min.) 750 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating 100 megohms min. at 20°C, 500 VDC Greater than 10% of nominal coil voltage At nominal coil voltage 0.45W: -25°C (-13°F) to 55°C (131°F) 0.36W: -25°C (-13°F) to 65°C (167°F) 0.2W: -25°C (-13°F) to 75°C (167°F) -25°C (-13°F) to 105°C (221°F) 0.062" DA at 10–55Hz 15 g P.B.T. polyester Tinned copper alloy 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 3.5 grams
Material Resistance
COIL
Power At Pickup Voltage (typical) Max Continuous Dissipation Temperature Rise 0.45W coil: 253 mW 0.36W coil: 203 mW 0.2W coil: 114 mw 0.8 W at 20°C (68°F) ambient 0.6 W at 40°C (104°F) ambient At nominal coil voltage: 0.45W: 54°C (97°F) 0.36W: 44°C (79°F) 0.2W: 30°C (54°F) 105°C (221°F) Shock
Storage Vibration
Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight
Max. Temperature
NOTES
1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Other coil resistances and sensitivities available upon request. 4. Specifications subject to change without notice.
ZETTLER
electronics
2000-06-06
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com
[email protected] Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
AZ954
RELAY ORDERING DATA
MEDIUM DUTY RELAYS – 0.45 W COIL COIL SPECIFICATIONS
Nominal Coil VDC 3 5 6 9 12 24 Max. Continuous VDC 4.0 6.7 8.0 12.0 16.0 32.0 Coil Resistance ±10% 20 56 80 180 320 1280 Must Operate VDC 2.25 3.75 4.50 6.75 9.0 18.0
ORDER NUMBER*
AZ954X–1C–3D AZ954X–1C–5D AZ954X–1C–6D AZ954X–1C–9D AZ954X–1C–12D AZ954X–1C–24D AZ954Y–1C–3D AZ954Y–1C–5D AZ954Y–1C–6D AZ954Y–1C–9D AZ954Y–1C–12D AZ954Y–1C–24D
MEDIUM DUTY RELAYS – 0.36 W COIL COIL SPECIFICATIONS
Nominal Coil VDC 3 5 6 9 12 24 Max. Continuous VDC 4.5 7.5 8.9 13.4 17.8 35.7 Coil Resistance ±10% 25 70 100 225 400 1600 Must Operate VDC 2.25 3.75 4.50 6.75 9.0 18.0
ORDER NUMBER*
AZ954X–1C–3DM AZ954X–1C–5DM AZ954X–1C–6DM AZ954X–1C–9DM AZ954X–1C–12DM AZ954X–1C–24DM AZ954Y–1C–3DM AZ954Y–1C–5DM AZ954Y–1C–6DM AZ954Y–1C–9DM AZ954Y–1C–12DM AZ954Y–1C–24DM
LIGHT DUTY RELAYS – 0.2 W COIL COIL SPECIFICATIONS
Nominal Coil VDC 3 5 6 9 12 24 Max. Continuous VDC 6.0 9.8 12.0 17.8 23.6 47.3 Coil Resistance ±10% 45 120 180 400 700 2800 Must Operate VDC 2.25 3.75 4.50 6.75 9.0 18.0
ORDER NUMBER*
AZ954X–1C–3DS AZ954X–1C–5DS AZ954X–1C–6DS AZ954X–1C–9DS AZ954X–1C–12DS AZ954X–1C–24DS AZ954Y–1C–3DS AZ954Y–1C–5DS AZ954Y–1C–6DS AZ954Y–1C–9DS AZ954Y–1C–12DS AZ954Y–1C–24DS
*Add suffix “E” for epoxy sealed version. Add suffix “B” for Class B or “F” for Class F insulation system.
MECHANICAL DATA
.620 [15.75] .423 [10.75]
AZ954X PC BOARD LAYOUT
.400 [10.16] .062 [1.56]
.465 [11.81]
5x ø.039±.005 [ø1.0]
.300 [7.62]
.060 [1.52]
.060 [1.52] .100 [2.54] .125 [3.18] .300 [7.62]
.100 [2.54]
VIEWED TOWARD TERMINALS
AZ954X WIRING DIAGRAM
1 2
AZ954Y WIRING DIAGRAM
1 2 6
AZ954Y PC BOARD LAYOUT
.400 [10.16] .062 [1.56]
6x ø.039±.005 [ø1.0]
7 12 11 12 11 7
.300 [7.62]
.060 [1.52]
VIEWED TOWARD TERMINALS
VIEWED TOWARD TERMINALS
.100 [2.54]
VIEWED TOWARD TERMINALS
Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010"
ZETTLER
electronics
2000-06-06
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com
[email protected] Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
.