BTL Driver IC for CD-ROM
BA5944FP
Description The BA5944FP is a BTL driver IC (actuator operation) developed for CD-RO...
BTL Driver IC for CD-ROM
BA5944FP
Description The BA5944FP is a BTL driver IC (actuator operation) developed for CD-ROMs. Two highly accurate 3.6V
regulators and a 4.2V reset circuit that acts as a peripheral power supply are included, as well as two general purpose comparators. An achievement in space savings of the set and reducing components has been realized by integrating
regulators and drivers into an actuator driver IC as one chip. Features 1) 2-channel dynamic range actuator driver built-in 2) Highly accurate (+/ 2%) 3.6V
regulator 2-channel built-in (1-channel
regulator can be controlled with On/Off switch.) 3) Highly accurate (+/ 2%) 4.2V reset curcuit built-in 4) Includes two general purpose comparators. Applications Slim CD-ROM, etc. Absolute Maximum Ratings(Ta=25 )
Parameter Supply voltage Power dissipation Operating temperature range Storage temperature range
*Derating:11.6mW/
Dimension (Units:mm)
HSOP25
Symbol VCC Pd Topr Tstg
.
Limits 13.5 1.45* -35 ~ +85 -55 ~ +150
Unit V W
for operation above Ta=25
Recommended Operating Conditions(Ta=25 )
Parameter VCC for Pre-block VCC for Power-block VCC for
Regulator-block Symbol PreVCC PowVCC REGVCC Min. 4.5 4.5 4.5 Typ. — — — Max. 13.2 Pre Vcc Pre Vcc Unit V V V
Electrical Characteristics (Unless otherwise noted, Pre/Pow/Reg, Vcc=5V, BIAS=1.65V, RL=8 )
Parameter Quiescent current
Output offset voltage Output amplitude 1 Output amplitude 2 Gain (close circuit) <REGULATOR> Peak output current Output vol...