Voltage controlled operational amplifier
BA6110FS
Standard ICs
Voltage controlled operational amplifier
BA6110FS
The BA6110FS is a low-noise, low-offset program...
Description
BA6110FS
Standard ICs
Voltage controlled operational amplifier
BA6110FS
The BA6110FS is a low-noise, low-offset programmable operational amplifier. Offering superb linearity over a broad range, this IC is designed so that the forward direction conductivity (gm) can be changed, making it ideal for applications such as voltage control amplifiers (VCA), voltage control filters (VCF) and voltage control oscillators (VCO). Distortion reduction circuitry improves the signal-to-noise ratio by a significant 10dB at a distortion rate of 0.5% in comparison with products not equipped with this feature. When used as a voltage control amplifier (VCA), a high S / N ratio of 86dB can be achieved at a distortion rate of 0.5%. The open loop gain is determined by the control current and an attached gain determining resistance RL, enabling a wide range of settings. In addition, a built-in low-impedance output buffer circuit reduces the number of attachments.
!Applications Electronic volume controls Voltage-controlled impedances Voltage-controlled amplifiers (VCA) Voltage-controlled filters (VCF) Voltage-controlled oscillators (VCO) Multipliers Sample holds Schmitt triggers !Features 1) Low distortion rate. (built-in distortion reduction bias diode) 2) Low noise. 3) Low offset voltage. (VIO = 3m VMax). !Block diagram
BUFFER INPUT VCA OUTPUT
4) Built-in output buffer. 5) Variable gm with superb linearity across three decade fields.
BA6110FS
BUFFER OUTPUT
16
15
14
13
12
11
10
1/2 – BU...
Similar Datasheet