4-channel BTL driver for CD players
Optical disc ICs
4-channel BTL driver for CD players
BA6392FP
The BA6392FP is a 4-channel BTL driver for CD player moto...
Description
Optical disc ICs
4-channel BTL driver for CD players
BA6392FP
The BA6392FP is a 4-channel BTL driver for CD player motors and actuators. It has an internal primary filter, and can be directly connected (without attached components) to the servo PWM output of all drivers other than the spindle driver. The BA6392FP is pin compatible with the BA6297AFP.
FApplications CD players, CD-ROM drives
FFeatures 1) HSOP 28-pin package allows for miniaturization of applications. 2) PWM input is filtered by the internal primary filter, eliminating the need for attached resistors and capacitors, thereby helping reduce the number of components. Resistor and capacitor time constants can also be changed with attached components.
3) Internal thermal shutdown circuit. 4) Internal mute circuit.
FAbsolute maximum ratings (Ta = 25_C)
FRecommended operating conditions (Ta = 25_C)
324
Optical disc ICs
FBlock diagram
BA6392FP
325
Optical disc ICs
FPin descriptions
BA6392FP
326
Optical disc ICs
FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 8V, f = 1kHz, RL = 8Ω)
BA6392FP
327
Optical disc ICs
FInput / output circuits
BA6392FP
FCircuit operation (1) Fig. 3 shows the inputs from the digital servo IC for CH1-CH3 drivers (all drivers except the spindle). SW1 is on when the forward input signal (HIGH level, over 2.4V) is present. SW2 is on when the reverse input signal is present (Fig. 2) The constant current (I1) at this time enters the RC and generates an integral ...
Similar Datasheet