DatasheetsPDF.com

BA6997FP Dataheets PDF



Part Number BA6997FP
Manufacturers Rohm
Logo Rohm
Description 4-channel BTL driver for CD players
Datasheet BA6997FP DatasheetBA6997FP Datasheet (PDF)

Optical disc ICs 4-channel BTL driver for CD players BA6997FP / BA6997FM The BA6997FP and BA6997FM, both designed for CD players, have an internal 4-channel BTL driver and 5V regulator (which requires attached PNP transistor), as well as switches for the 5V regulator and temperature monitor pins. FApplications CD players and other optical disc devices FFeatures 1) 4-channel BTL driver for CD players. 2) Wide dynamic range. 3) Internal thermal shutdown circuit. FAbsolute maximum ratings (Ta = 25.

  BA6997FP   BA6997FP


Document
Optical disc ICs 4-channel BTL driver for CD players BA6997FP / BA6997FM The BA6997FP and BA6997FM, both designed for CD players, have an internal 4-channel BTL driver and 5V regulator (which requires attached PNP transistor), as well as switches for the 5V regulator and temperature monitor pins. FApplications CD players and other optical disc devices FFeatures 1) 4-channel BTL driver for CD players. 2) Wide dynamic range. 3) Internal thermal shutdown circuit. FAbsolute maximum ratings (Ta = 25_C) 4) Internal level shift circuit, for a minimum of attached components. 5) Internal 5V regular with switch. FRecommended operating conditions (Ta = 25_C) 403 Optical disc ICs FBlock diagram BA6997FP/BA6997FM 404 Optical disc ICs FPin descriptions BA6997FP/BA6997FM 405 Optical disc ICs BA6997FP/BA6997FM FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 8V, f = 1kHz, RL = 8Ω) 406 Optical disc ICs FApplication example BA6997FP/BA6997FM 407 Optical disc ICs FOperation notes (1) The BA6997FP and BA6997FM have an internal thermal shutdown circuit. Output current is muted when the chip temperature exceeds 175_C (typically). (2) The output current can be muted by opening the mute pin (pin 9) voltage or lowering it below 0.5V. This pin should be pulled up above 2.0V during normal operation. When muting occurs, the output pins output the internal bias voltage, roughly VCC / 2. (3) The regulator can be turned off by opening the regulator switch (pin 10) or lowering it below 0.5V. This pin should be pulled up above 2.0V during normal operation. (4) Muting also occurs when the bias pin (8 pin) voltage drops below 1.4V (typically). This pin should stay above 1.6V during normal operation. (5) Attach a bypass capacitor (roughly 0.1µF) to the power supply, at the base of the IC. (6) Be sure to connect the radiating fin to an external ground. BA6997FP/BA6997FM (7) The capacitor between regulator output (pin 6) and REGGND (pin 7) also serves to prevent oscillation of the IC, so select one with good temperature characteristics. (8) We recommend 2SB1132 as the PNP transistor to attach to the regulator. (9) The internal circuitry of the temperature monitor pin is shown in the diagram below. Note that the internal reference voltage is also used for the 5V regulator, which will cease to operate normally when the temperature monitor pin emits a current exceeding the regulator’s capacity. Set I to several dozen µA. FElectrical characteristic curves 408 Optical disc ICs BA6997FP/BA6997FM FExternal dimensions (Units: mm) 409 .


BA6997FM BA6997FP BA7004


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)