Type 430P
Vishay Sprague
Metalized Polyester Film Capacitors Wrap-and-Fill
FEATURES
• Economical • Extensive standard ratings • Rugged construction • Small size
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55°C to + 85°C. Capacitance Range: 0.0047µF to 10.0µF. Capacitance Tolerance: ± 20%, ± 10%, ± 5%. DC Voltage Rating: 50 WVDC to 600 WVDC. Dissipation Factor: 1.0% maximum. Voltage Test: 200% of rated voltage for 2 minutes. Insulation Resistance: At + 25°C: 25,000 Megohm - Microfarads or 50,000 Megohm minimum. At + 85°C: 1000 Megohm Microfarads or 2500 Megohm minimum. Vibration Test (Condition B): No mechanical damage, short, open or intermittent circuits.
PHYSICAL CHARACTERISTICS
Lead Pull: 5 pounds (2.3 kilograms) for one minute. No physical damage. Lead Bend: After three complete consecutive bends, no damage. Marking: Sprague® trademark, type or part number, capacitance and voltage. DC Life Test: 125% of rated voltage for 250 hours @ + 85°C. No open or short circuits. No visible damage. Maximum ∆ CAP = ± 10%. Minimum IR = 50% of initial limit. Maximum DF = 1.25%. Humidity Test: 95% relative humidity @ + 40°C for 250 hours, no visible damage. Maximum ∆ CAP ± 10%. Minimum IR = 20% of initial limit. Maximum DF = 2.0%.
DIMENSIONS in inches [millimeters]
1.750 [44.45] Min. L + 0.062 [1.57] - 0.031 [0.79] 1.750 [44.45] Min. D Max.
Solid Tinned Wire*
* Lead size: D Max. < 0.270 [6.86] 0.025 [0.64] (No. 22 AWG). D Max. ≥ 0.270 [6.86] 0.032 [0.81] (No. 20 AWG). Leads to be within ± 0.062" [1.57mm] of center line at egress but not less than 0.031" [0.79mm] from edge.
STANDARD RATINGS in inches [millimeters]
CAPACITANCE (µF) PART NUMBER CASE SIZE D L
± 10% TOLERANCE
430P124X9050 430P154X9050 430P184X9050 430P224X9050 430P274X9050 430P334X9050 430P394X9050 430P474X9050 430P564X9050 430P684X9050 430P824X9050
± 5% TOLERANCE
50 WVDC 430P124X5050 430P154X5050 430P184X5050 430P224X5050 430P274X5050 430P334X5050 430P394X5050 430P474X5050 430P564X5050 430P684X5050 430P824X5050
LEAD AWG NO.
0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82
0.196 [4.98] 0.210 [5.33] 0.223 [5.66] 0.240 [6.10] 0.258 [6.55] 0.279 [7.09] 0.250 [6.35] 0.269 [6.83] 0.288 [7.32] 0.311 [7.90] 0.270 [6.86]
0.625 [15.88] 0.625 [15.88] 0.625 [15.88] 0.625 [15.88] 0.625 [15.88] 0.625 [15.88] 0.750 [19.05] 0.750 [19.05] 0.750 [19.05] 0.750 [19.05] 1.000 [25.40]
22 22 22 22 22 20 22 22 20 20 20
www.vishay.com 74
For technical questions, contact
[email protected]
Document Number: 42025 Revision 13-Nov-03
Type 430P
Vishay Sprague
STANDARD RATINGS in inches [millimeters]
CAPACITANCE (µF) 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 7.0 10.0 0.082 0.1 0.12 0.15 0.18 0.22* 0.27 0.33* 0.39 0.47 0.56 0.68 0.82 1.0* 1.5 2.0* 2.5 3.0 4.0 5.0 6.0 7.0* 10.0 0.047 0.056 0.068 0.082 0.10* 0.12 0.15 0.18 0.22* 0.27 0.33 0.39 0.47* 0.56 0.68* 0.82 1.0* 1.5 2.0* 2.5 3.0 4.0* 5.0 * These ratings are stocked. Document Number: 42025 Revision 13-Nov-03 For technical questions, contact spresale.