SPST SOLID-STATE RELAY
53024
SPST SOLID-STATE RELAY
Mii
HYBRID MICROELECTRONICS PRODUCTS DIVISION
Features: • • • • • • • • • Replacement fo...
Description
53024
SPST SOLID-STATE RELAY
Mii
HYBRID MICROELECTRONICS PRODUCTS DIVISION
Features: Replacement for 690-2 SPST, Normally Open 1000 V RMS Optical Isolation CMOS or TTL Compatible Input Power FET Output – Low On-state Resistance Full Military Temperature Operation: -55ºC to +105ºC Military Environmental Screening Available Built and Tested to MIL-PRF-28750 utilizing the test methods of MIL-STD-883C Qualified to 86001-001
Applications: Low level power control Current loop switches Isolated line driver Servo and synchro resolver control Military/Space general purpose switching
DESCRIPTION The 53024 is a military SPST solid-state relay. This small, light-weight device is resistant to damage from shock and vibration, and immune to contact-related problems (contamination, arcing) associated with mechanical equivalents. Optical coupling between the input and output stages provides effective isolation up to 1000 volts AC RMS. Power FET outputs eliminate bipolar offset, and minimize output voltage drop. The control logic is TTL and CMOS compatible, and will accommodate bias supplies between 3.8 and 32 VDC. A built-in Schmitt trigger increases noise margin when using the device in the CMOS input mode. This solid-state relay is ideal for use in military systems, or wherever high reliability, low power actuation, and light weight are design considerations. Applications include general purpose signal switching and electronic load control.
ABSOLUTE MAXIMUM...
Similar Datasheet