EL4393C

EL4393C EL4393C Triple 80 MHz Video Amplifier w Disable Features  80 MHz b 3 dB bandwidth for gains of 1 to 10  900 V ms slew rate  10 MHz bandwidth flat to 0 1 dB  Excellent differential gain and phase  TTL CMOS compatible  Available in SOL-16 General Description The EL4393C is three wideband current-feedback amplifiers optimized for video performance Each amplifier can drive a load of 150X at video levels Each amplifier has a disable capability which is controlled by a TTL CMOS compatible logic signal The EL4393C operates on supplies as low as g 4V up to g 15V Being a current-feedback design the bandwidth stays relatively constant at approximately 80 MHz over the g 1 to g 10 gain range The EL4393C has been optimized for use with 1300X feedback resistors at a gain of 2 When the outputs are disabled the supply current consumption drops by about 4 mA per channel that is disabled This feature can be used to reduce power dissipation Applications       RGB drivers RGB multiplexers RGB gain blocks Video gain blocks Coax cable driver ADC drivers input multiplexer Connection Diagram Ordering Information Part No Temp Range Package Outline EL4393CN b 40 C to a 85 C 16-Lead P-DIP MDP0031 EL4393CM b 40 C to a 85 C 16-Lead SOL MDP0027 4393 – 1 January 1996 Rev B Note All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication however this data sheet cannot be a ‘‘controlled document’’ Current rev...