Document
TOSHIBA Transistor Silicon NPN Epitaxial Planar Type
2SC5107
2SC5107
For VCO Application
Unit: mm
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage Collector-emitter voltage Emitter-base voltage Base current Collector current Collector power dissipation Junction temperature Storage temperature range
VCBO VCEO VEBO
IB IC PC Tj Tstg
20
V
10
V
3
V
15
mA
30
mA
100
mW
125
°C
−55 to 125
°C
Note:
Using continuously under heavy loads (e.g. the application of
high temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
JEDEC
―
operating temperature/current/voltage, etc.) are within the
JEITA
SC-70
absolute maximum ratings. Please design the appropriate reliability upon reviewing the
TOSHIBA
2-2E1A
Toshiba Semiconductor Reliability Handbook (“Handling
Weight: 6 mg (typ.)
Precautions”/“Derating Concept and Methods”) and individual
reliability data (i.e. reliability test report and estimated failure rate, etc).
Start of commercial production
1993-10
1
2014-03-01
2SC5107
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min Typ. Max Unit
Collector cut-off current Emitter cut-off current
DC current gain
Transition frequency Insertion gain Output capacitance Reverse transfer capacitance Collector-base time constant
ICBO
VCB = 10 V, IE = 0
⎯
IEBO
VEB = 1 V, IC = 0
⎯
hFE (Note 1)
VCE = 5 V, IC = 5 mA
80
fT ⎪S21e⎪2
Cob Cre Cc・rbb’
VCE = 5 V, IC = 5 mA
4
VCE = 5 V, IC = 5 mA, f = 1 GHz
7
⎯ VCB = 5 V, IE = 0, f = 1 MHz (Note 2)
⎯
VCB = 5 V, IC = 3 mA, f = 30 MHz
⎯
⎯
0.1
μA
⎯
0.1
μA
⎯
240
⎯
6
⎯ GHz
11
⎯
dB
0.7
⎯
pF
0.5
0.9
pF
5.5
15
ps
Note 1: hFE classification O: 80 to 160, Y: 120 to 240 Note 2: Cre is measured by 3 terminal method with capacitance bridge.
Marking
2
2014-03-01
2SC5107
3
2014-03-01
2SC5107
S-Parameter ZO = 50 Ω, Ta = 25°C
VCE = 5 V, IC = 5 mA
Frequency (MHz) 200 400 600 800 1000 1200 1400 1600
S11
Mag.
Ang.
0.684
−47.0
0.438
−79.2
0.301
−101.2
0.226
−119.2
0.182
−136.2
0.159
−153.3
0.147
−170.3
0.145
174.4
S21
Mag.
Ang.
10.116
136.8
7.260
112.9
5.388
99.1
4.227
90.0
3.494
82.7
2.988
76.9
2.632
71.2
2.345
66.0
1800 2000
0.149
162.6
2.128
61.4
0.161
150.9
1.967
57.1
S12
Mag.
Ang.
0.049
63.1
0.072
56.5
0.090
56.5
0.107
57.6
0.124
58.8
0.142
59.6
0.163
59.9
0.182
59.2
0.200
58.4
0.219
58.1
S22
Mag.
Ang.
0.765
−29.5
0.553
−37.8
0.452
−39.1
0.402
−39.0
0.374
−38.9
0.359
−39.4
0.348
−40.7
0.339
−43.2
0.329
−46.3
0.318
−49.5
4
2014-03-01
2SC5107
5
2014-03-01
2SC5107
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
• PRODUCT IS NEITHER INTENDE.