Document
Ordering number:723H
PNP/NPN Epitaxial Planar Silicon Transistors
2SB826/2SD1062
50V/12A Switching Applications
Applications
· Relay drivers, high-speed inverters, converters, and other general high-current switching applications.
Features
· Low-saturation collector-to-emitter voltage : VCE(sat)=–0.5V (PNP), 0.4V (NPN) max.
· Wide ASO leading to high resistance to breakdown.
Package Dimensions
unit:mm 2010C
[2SB826/2SD1062]
( ) : 2SB826
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature
Symbol
VCBO VCEO VEBO
IC ICP PC Tj
Tstg
Electrical Characteristics at Ta = 25˚C
Tc=25˚C
Conditions
Parameter
Symbol
Conditions
Collector Cutoff Current Emitter Cutoff Current DC Current Gain
Gain-Bandwidth Product
ICBO IEBO hFE1 hFE2
fT
VCB=(–)40V, IE=0 VEB=(–)4V, IC=0 VCE=(–)2V, IC=(–)1A VCE=(–)2V, IC=(–)5A VCE=(–)5V, IC=(–)1A
* : The 2SB826/2SD1062 are classified by 1A hFE as follows :
70 Q 140 100 R 200 140 S 280
1 : Base 2 : Collector 3 : Emitter
JEDEC : TO-220AB EIAJ : SC46
Ratings (–)60 (–)50 (–)6 (–)12 (–)15 40 150
–55 to +150
Unit V V V A A W ˚C ˚C
Ratings min typ
70* 30
10
max (–)0.1 (–)0.1 280*
Unit mA mA
MHz
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
91098HA (KT)/10996TS (KOTO)/8-3832/D251MH/4027KI/3135KI No.723–1/4
Parameter Collector-to-Emitter Saturation Voltage
Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time
Fall Time
Storage Time
Switching Time Test Circuit
2SB826/2SD1062
Symbol
Conditions
VCE(sat) IC=(–)6A, IB=(–)0.3A
V(BR)CBO V(BR)CEO V(BR)EBO
ton
IC=(–)1mA, IE=0 IC=(–)1mA, RBE=∞ IE=(–)1mA, IC=0 See specified test circuit.
tf See specified test circuit.
tstg See specified test circuit.
Ratings min typ
(–)60 (–)50
(–)6
(0.2) 0.1
(0.4) 1.2
(0.1) 0.05
max 0.4
(–0.5)
Unit
V V V V V µs µs µs µs µs µs
No.723–2/4
2SB826/2SD1062
No.723–3/4
2SB826/2SD1062
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any and all SANYO products described or contained herein fall under strategic products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of Japan, such products must not be exported without obtaining export license from the Ministry of International Trade and Industry in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification” for the SANYO product that you intend to use. Inf.