DatasheetsPDF.com

2SD1145 Dataheets PDF



Part Number 2SD1145
Manufacturers Sanyo Semicon Device
Logo Sanyo Semicon Device
Description NPN TRANSISTOR
Datasheet 2SD1145 Datasheet2SD1145 Datasheet (PDF)

Ordering number:EN784E NPN Epitaxial Planar Silicon Transistor www.DataSheet4U.com 2SD1145 High-Current Driver Applications Applications · Relay drivers, hammer drivers, lamp drivers, strobe DC-DC converters, motor drivers. Package Dimensions unit:mm 2006B [2SD1145] 6.0 5.0 4.7 Features · Low saturation voltage. · Large current capacity and wide ASO. 0.5 0.6 6.0 14.0 3.0 8.5 0.5 0.5 1 2 3 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Collector-to-Base Voltage Collect.

  2SD1145   2SD1145


Document
Ordering number:EN784E NPN Epitaxial Planar Silicon Transistor www.DataSheet4U.com 2SD1145 High-Current Driver Applications Applications · Relay drivers, hammer drivers, lamp drivers, strobe DC-DC converters, motor drivers. Package Dimensions unit:mm 2006B [2SD1145] 6.0 5.0 4.7 Features · Low saturation voltage. · Large current capacity and wide ASO. 0.5 0.6 6.0 14.0 3.0 8.5 0.5 0.5 1 2 3 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg 100ms, single pulse Conditions 1.45 1.45 1 : Emitter 2 : Collector 3 : Base EIAJ : SC-51 SANYO :MP Ratings 60 20 6 5 8 0.9 150 –55 to +150 Unit V V V A A W ˚C ˚C Electrical Characteristics at Ta = 25˚C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Symbol ICBO IEBO hFE1 hFE2 fT Cob VCE(sat) VBE(sat) 100 Conditions VCB=50V, IE=0 VEB=5V, IC=0 VCE=2V, IC=0.5A VCE=2V, IC=3A (Pulse) VCE=10V, IC=50mA VCB=10V, f=1MHz IC=3A, IB=60mA (Pulse) IC=3A, IB=60mA (Pulse) E 200 160 F 320 280 G 560 Ratings min typ max 1.0 1.0 100* 75 120 45 0.5 1.5 560* Unit µA µA MHz pF V V * : The 2SD1145 is classified by 0.5A hFE as follows : Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 21599TH (KT)/2090MO/5257KI/3095KI, 6212KI, ki No.784–1/3 2SD1145 www.DataSheet4U.com No.784–2/3 2SD1145 www.DataSheet4U.com Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 1999. Specifications and information herein are subject to change without notice. PS No.784–3/3.


2SD1140 2SD1145 2SD1149


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)